[ Chinese wardrobe net ] For the group of people who are away from home, the large rental room is especially suitable for the use of cloth wardrobe . The cloth wardrobe is detachable and detachable, can be assembled, and is very convenient to use. If it is dirty, it may be removed and cleaned. If it is moved, it is easy to carry. Although convenient to use, but the installation of the cloth wardrobe is often a headache, facing a bunch of components, I do not know how to start. Let's let the website Xiaobian introduce it to everyone!
Cloth wardrobe installation can be done with reference to the recommendations given below:
The first step: When purchasing a product, it is recommended to check whether the packaging is damaged. If it is, it may be crushed by the steel pipe of the cloth closet. In this case, it cannot be purchased, otherwise it will be a loss.
Step 2: After opening the package, check the accessories inside to see if they are all complete. Each product will be accompanied by instructions, which can be verified according to the instructions. If the parts are missing, it may be impossible to assemble a complete cloth wardrobe. It is recommended to wear gloves when installing.
The third step: first install the middle of the bottom one, take the bottom with the high four-way joint, the middle is connected with a short tube. Install a four-way connector on each side and then install the tube on both sides. You can install long tubes on one side and short tubes on the other according to your needs. Then install the bottom on both sides and install a three-way connector on each side.
Step 4: After the bottom is installed, insert six short steel pipes, and then put the cloth of the cloth closet on the surrounding holes, then install a layer of baffle similar to the bottom and put it on the six steel pipes. .
Step 5: If the wardrobe is divided on both sides, first follow the short-side floor, first insert the side steel pipe, and then install the spacer. After that, connect the four-way joint, install two horizontal steel pipes, install the cloth, and then fill the four-way joints on both sides. Finally, the partitions are all installed.
Step 6: After the short side partitions are installed, the long side is a vertical hanging area, and the three long joints are connected in the middle to the top position.
Step 7: After both sides are installed, connect them directly with long steel pipes. The wardrobe is too high, not enough to squeeze, can be pushed back sideways, it will be more convenient to install. At the same time, the hanging steel pipe is also mounted with a hook joint.
Step 8: When it is placed on the top of the cloth closet, it is recommended to pull the bottom to the upper point until the top is installed diagonally. At this point, the cloth cover can be pulled down and the cloth wardrobe is installed.
Thermal label paper is a paper material treated with a high thermal sensitivity heat-sensitive coating. The high-sensitivity surface material can be used for low-voltage print heads, so the wear on the print head is minimal.
Thermal paper is a kind of thermal paper used in electronic scales and cash registers. The easiest way to test thermal paper is to use your fingernail to scratch the paper, leaving a black scratch. Thermal paper is suitable for cold storage, freezer and other shelf signs, and its size is mostly fixed in the standard of 40mmX60mm.
Thermal paper is a printing paper specially used for thermal printers and thermal fax machines. Its quality directly affects the print quality and storage time, and even affects the service life of printers and fax machines.
The material is non-waterproof, non-oilproof, and tearable. It is mostly used in supermarket electronic scale labels, chemical laboratories, etc. The product is suitable for embossing, offset printing and flexographic printing. The yellow plastic-coated bottom paper has good flatness, and has good strength when die-cutting on flat or round press equipment. Under the adapted environment, this product can be used for automatic labeling, but it is common for end users and printing plants. It is advisable to use it after the test; the glassine paper is used for printing from roll to roll; the yellow color paper is used for printing from roll to sheet and sheet to sheet.
Thermal Labels,Thermal Transfer Labels,Thermal Sticker,Thermal Label Printer
Shijiazhuang Qiancen Industry Co.,ltd , https://www.yuyilang.com