[ Chinese wardrobe net ] sliding door wardrobe is fashionable and easy to use, so it has always been the first choice for people to buy Wardrobes. So, how should we buy a sliding wardrobe? In daily life, how to clean and maintain can extend the service life of sliding wardrobe? Below, the website will introduce you to the sliding door wardrobe purchase method, as well as the sliding door wardrobe cleaning and maintenance.
How to choose the sliding door wardrobe
1, the door frame material and the thickness of the door panel are particular
At present, the frame materials used for the sliding door of the wardrobe (the whole wardrobe brand ) are mainly carbon steel materials and aluminum-titanium alloy materials, among which the aluminum-titanium alloy material is the most durable and durable; the thickness of the door panel is another point of attention for sliding doors. For wood boards, it is best to choose 10mm or 12mm thick plates, which is stable and durable when used. The thickness is less than 8mm, which will appear thin and light; the door panels with thickness less than 6mm are easily deformed and difficult to meet the requirements of normal use.
2, the seal determines the environment inside the wardrobe
In order to ensure that the two doors are staggered and closed, all sliding door products will have a gap. The general external pulleys need a spacing of 15 mm. This interval affects the sealing of the sliding door, especially in places with large wind and sand. The inside of the closet is easy to accumulate dust. Although most products have tops, the gap between the tops used in different products and the gap size is still relatively large. Try to choose products with small spacing and tight tops. For example, the product has a door spacing of only 5 mm, and the high-density tops basically prevent the intrusion of dust and keep the wardrobe and clothes clean.
3, the critical point of life is on the pulley
The key factor affecting the service life of the sliding door (the overall wardrobe brand) is the pulley. The design of the big brand's pulleys is about 15 years, and the pulleys of some counterfeit products may break down in 2-3 months, which seriously affects the use of sliding doors. The pulley of the closet door consists of two parts, one is the top wheel and the other is the bottom wheel. There are two ways to install the bottom wheel, one is implicit and the other is external. The hidden bottom wheel means that the bottom wheel is installed under the door. After the rail is placed, you can't see the wheel from the front and the back of the door. The material selection of the pulleys mentioned above, the pulleys of fiberglass materials are the most wearable on the market today. The pulley slides are complicated, the pulleys are smooth, pressure-resistant, wear-resistant, safe and reliable. Consumers should pay attention to the most. Households generally require more than 60,000 times of pushing and pulling.
4, the key to bearing, small pulleys can not be underestimated
The pulley is the smallest but most important hardware component of the sliding door (the overall wardrobe brand). There are three kinds of pulleys on the market: plastic pulleys, metal pulleys and fiberglass pulleys. The plastic pulley is hard, but it is easy to be broken. It will become awkward and hard when used for a long time, and the push-pull feeling becomes very poor. The metal pulley is strong, but it is easy to generate noise when it comes into contact with the rail. The fiberglass pulley has the toughness, wear resistance, smooth sliding and durability, and is the best pulley material available today.
5, the track is good or bad is critical
The high-quality sliding door (integrated wardrobe brand) hardware is mainly reflected in the design and manufacture of the pulley system and the track, and the perfect combination of the two, the track is crucial. The quality of the track depends on the fact that it must have a curvature that can be matched with the pulley. It should be reminded that the good track is excellent in the strength design and the smoothness of the contact surface with the pulley, not the thicker the track wall, the better. At present, the track of the sliding door has two types of cold rolled steel track and aluminum alloy track. Rails are not always good. It should be said that good aluminum rails are superior to rails in some respects, especially in terms of noise immunity. In addition, it is necessary to pay attention to whether the product has a stop block and an upper and lower rail positioning system, whether there is a glass anti-collision strip, whether the bearing type pulley is smooth and silent when pushed, whether a shock absorption system is placed in the bottom wheel, whether there is a door height adjusting device, etc. .
Sliding door wardrobe cleaning and maintenance
1. When using the sliding door, you must first check whether the drawer handle is protruding or abnormal. If there is a protrusion, it should be flat first, otherwise it will damage the side cabinet or handle.
2. If the sliding door is used for a long time, the dustproof strip may have a slight glue drop. It can be glued with double-sided tape or 502 glue; the lower track positioner has a gap in the position, and the flat positioner can be used to align the positioner to the side. Push the edge of the board to the tight seam; the sliding door will be tilted, and if it is tilted backward, adjust the left bottom wheel to 'low' point or turn the right bottom wheel to "high" point.
3. The sliding door pulley is the soul of the whole inner door. Its body is small and plays a significant role. It is normal for the sound to be used for a long time. To ensure the smooth and quiet sound of the pulley, please add some lubricating oil along the upper and lower pulleys every 2 to 3 months to keep the pulley smooth and smooth.
4. When the air in the living room or the weather is too humid, please open the doors and windows regularly to ventilate or open the air conditioner for more than one hour and put a small bag of dry lime or other small amount of desiccant in the corner of the closet to prevent mold and deformation of the cabinet and door panel. Once a month.
5, to ensure that the door is clean, clean track will make the life of the pulley greatly extended, we must always clean the debris in the track, especially hard objects, there can be no debris, dust in the track. When cleaning, use a semi-dry wipe to wipe the cabinet and cabinet door. Do not use corrosive detergent. The dust of the track can be cleaned with a vacuum cleaner or a small brush. The metal parts such as the frame and tie rods are wiped with a cotton dry cloth.
6, must prevent heavy objects and sharps from hitting the track, scratching the cabinet and the door panel, the cabinet edge can not touch the water and other liquid flux, so as to avoid the edge of the edge off; if you accidentally get the water, the first time Wipe clean with a cotton cloth.
7. Move the door wardrobe as long as it is cleaned with a clean cotton rag. If it is dirty, use soapy water or neutral detergent, natural water, gasoline, etc., wipe with a damp cloth, and wipe with a cotton cloth. Just do it.
8, as much as possible to let the wardrobe breathable, or regularly use dehumidifying agents, in order to avoid the cabinet, clothing damp bacteria; less use of chemical ingredients of the fragrance to remove the smell of the wardrobe, because they are likely to cause damage to the clothes or wardrobe material.
Add some unique style and functionality to your home with this Coffee Table from the popular collection. The top shelf and drawers creating a multipurpose work surface so you can work from home, surf the web, or eat a snack while relaxing on your couch. Other features include hidden storage beneath the top and drawers for storing blankets and board games or displaying knick-knacks and picture frames. This Coffee Table is finished on all sides making it a versatile fit for any room in your home.
Coffee Table,Glass Coffee Table,Smart Coffee Table,Coffee Table Sets
Baklam , https://www.baklamfurniture.com