Usually when going out on the outdoors, it is difficult to avoid the use of cutting tools. Many tools for living are not suitable. Most of them are household kitchen knives or fruit knives, which are not convenient for outdoor use. As an outdoor tool, it must be light and easy to carry, and outdoor cutting tools on the market can basically meet the requirements. However, there are uncomfortable grips during use, and they become blunt when used for a period of time. Recently, Tekut launched a shark knives that are not only compact and lightweight, but also comfortable and sharp for easy cutting. Here's a look at what the Dick Shark Knife has to use.
The Dick Shark Knife Box is a transparent, rigid plastic that clearly shows the details of the internal knives. The appearance of the box is relatively simple. Only the brand logo “Tekut†is printed. The base and the box are not affixed with a sealant. The base is easily thrown off during express delivery.
The accessories inside the box are relatively simple, with only the Dick Shark Knife and instructions.
The shark knives are light grey, compact and lightweight overall, 121mm long in the closed state, only about 155g in weight, can be easily held in one hand, without a sense of weight. The use of a matte finish enhances slip resistance and reduces fingerprint residue.
The handle material used is now more common G10 material, many people do not know what G10 is, in fact, G10 is a composite of epoxy-filled glass and resin. With good strength, no heat transfer, impact resistance and corrosion resistance, it can withstand the thermal expansion and contraction caused by the instantaneous climate change.
The handle surface was treated with anti-skid treatment. In the lower left and upper right corners, five grooves with evenly distributed grooves were designed to provide a good handle and friction. At the same time the thickness of the handle is only 15mm, easy to carry. The shape of the arc adopts the human hand design, which can fit well with the hand grip. It is comfortable and stable whether you hold it or hold it upside down.
The rear end of the handle is equipped with a telescopic back clip, which can be hung on the pocket more stably. If you want to carry the concealed pocket knife, you can extend the clip to extend the pocket knife deeper into the pocket, but it is not easy to pull it out immediately.
Shark Knife uses a new push-type quick-opening fin and ball bearing system, which is more efficient than the traditional toggle flipper, faster and crisper, and able to react quickly in the face of unexpected situations.
The length of the folding knife is 220mm. The traditional teardrop-shaped design of the knife head ensures maximum puncture capacity while ensuring the length of the cutting line, and can be more competent for more work. Sandvik 12C27 stainless steel material with rust and corrosion resistance was used as a folding knife to enhance the hardness and flexibility of the cutting edge.
The cutting edge has a fine craftsmanship, and the back is designed with anti-skid ribs, which can exert better force during the cutting operation.
The curved design at the middle of the index finger can enhance the hand grip, making it stronger and stronger.
Second, use experience
When the Dick Shark Knife is used, you can quickly remove the knife by slightly pushing a knob on the end of the blade. However, it is not always very smooth every time the knife is released. Occasionally, when the knife edge cannot be completely expanded, it may be that the protruding protrusion is not enough or the bearing is not smooth.
Lining locks are very important for folding knives, and must be locked after cutting, otherwise it is easy to bring injury or cutting inconvenience. Shark folding knife adopts the traditional padlock structure. When the blade is fully opened, the spring bar will immediately pop up against the tail of the blade, lock the blade to make it stable, and always remain in the fully open state.
When it is necessary to unlock the knife, just use the thumb to push the spring lever to one side, then push the back of the knife with the index finger, then the side of the knife edge is pressed against the spring rod, then the thumb can be released and retracted, and the tool can be used to push back. Finish the knife. With liner lock assistance, you can easily complete the knife and knife with one hand.
When the knife is retracted, the anti-skid teeth on the back of the knife can push the back of the knife better. At the same time, the protrusion on the back of the knife edge can suspend the reclaimed blade, which can prevent the thumb from being injured.
Cut the branches. Shark's knife is very easy to cut off, the forefinger-sized branches.
Cut branches. Sharp edges make it possible to sharpen the blunt section of the branch just two or three times.
Cut the paper box. In front of the express cartons used for courier delivery, a knife is cut and the corner of the carton is easily cut.
Cut the fabric. This is a test for the sharpness of the blade, and the Shark Knife cuts a piece of cloth with one knife. It can be imagined as a very good sharpness.
Thorn mineral water bottle. The dripping knife tip pierces the common mineral water bottle quite easily and is very smooth.
Third, experience summaryThe Dick Shark Knife is compact and light, with excellent materials and fine craftsmanship. Its experience is very good. Not only is it comfortable to hold or hold down, but it is also very comfortable. The ball bearing system is well used. The padlock can lock the blade firmly and has a good sharpness. It can easily meet the cutting work in the outdoors.
insufficient:
1. The back clip on the handle is somewhat uncomfortable to hold;
2. The locking force of the lining lock is not enough, and the strong cutting work cannot be performed.
Filing Cabinet,Cabinet For Living Room Furniture,Wooden Shoe Cabinet,File Cabinet With Wheels
Longsheng Office Furniture Co.,Ltd , https://www.longshengfurniture.com