The waste plastics selected after the sorting can be put into the crusher for crushing and cleaning.Generally, a crusher with a washing dragon is used. A bracket with a height of about 1.5 meters is supported next to the crusher. For solution or detergent, use a tube with flow control to introduce the detergent into the pulverizer, so that during the pulverization process, the detergent (at the same time also need a tube to add water) and the waste plastic are fully rubbed in the pulverizer The crushed material from the crusher directly enters the cleaning tank. The general size of the cleaning tank is more than 8 meters long, 1.2 meters wide and 1 meter deep. There are sewage holes at the bottom of the tank, and 3 to 4 channels of crushed film material need to be installed above the cleaning tank. Flow guide device, the guide device can even distribute about 10 ∮4 holes on one side of the 6-point pipe. When the water in the pipe is sprayed from the hole, the crushed material washed on the water surface forms a directional For the flow, an automatic feeder is placed at the other end of the cleaning tank, so that the comminuted material flowing through the directional flow is sent to the drain to be processed area through the automatic feeder.
"Puzzle 3D Eraser Bulk,Puzzle 3D Eraser,Building Blocks Eraser,Toppers Cute Erasers "
Yiwu Shengshang Stationery Co., Ltd. , https://www.ss-stationery.com