Shanghai Haozhuang Instrument Co., Ltd. has developed the LNB brand low-temperature constant temperature series, which is very good in quality and low in price. Welcome your purchase!
Internal structure and principle of use:
1. Low temperature thermostat parts: compressor, condenser, evaporator, fan (inside and outside) circulating water pump, stainless steel liner, heating tube, intelligent temperature control meter.
2. The internal operating principle of the low-temperature tank: after the compressor is operated, it will be vaporized by suction-compression-exhaust-condensation-throttling-and then low-temperature evaporation to absorb heat. The water temperature will be reduced to the temperature set by the temperature control table, such as temperature control The table setting temperature is higher than normal temperature. The contactor in the temperature control meter works automatically, giving the heating tube a current signal, the heating tube starts to work, when working in the low temperature constant temperature bath. The inlet and outlet of the whole machine can be used for internal circulation or external circulation of the internal water source, and the internal water source can also be led out. Do the second constant temperature field outside the cryostat.
How to use the cryostat The instrument uses 220V AC power, please make sure that the rated current of the power socket is not less than 10A before use, and it has a safety grounding device (please connect the grounding device to the working room when using it). When adding water, please note that it is not less than 8cm away from the upper cover. Soft water must be used, preferably distilled water. Do not use well water, river water, spring water or other hard water to prevent the heating tube from bursting and affecting the constant temperature sensitivity. Please use it correctly according to the instructions of the temperature control instrument, set the required temperature value> first turn on the power, set the required temperature value on the instrument according to the instruction, when the temperature reaches the set temperature, you can turn on the cycle switch, so All programs enter the normal working state.
Precautions for use 1. Add a liquid medium into the front tank of the low-temperature constant temperature bath, the liquid level of the medium should be about 30mm lower than the worktable, otherwise the heater will be damaged when energized;
2. The selection of the liquid medium in the low-temperature constant temperature bath should meet the following principles:
When the working temperature is 5 ~ 85 ℃, the liquid medium generally uses water;
When the working temperature is 85 ~ 95 ℃, the liquid medium can choose 15% glycerin aqueous solution;
When the working temperature is higher than 95 ° C, the liquid medium generally uses oil, and the open cup flash point of the selected oil should be higher than the working temperature by more than 50 ° C;
3. Power supply: 220V50Hz, the power supply should be greater than the total power of the instrument, the power supply must have a good "ground" device;
4. The instrument should be placed in a dry and ventilated place with no obstacles within 300mm around the instrument;
5. When the working temperature of the constant temperature bath is high, you should be careful not to open the upper cover and do not enter your hand with the hand to prevent burns;
6. After use, all switches are turned off to cut off the power supply;
The instrument should do regular cleaning work to keep the work surface and operation panel clean;
Always pay attention to observe the liquid level in the tank. When the liquid level is too low, the liquid medium should be added in time; considering the safety factors, we stipulate that the constant temperature tank above 100 ℃ is made into an internal circulation. If the external circulation is changed according to the customer's requirements, the customer should pay special attention to the firmness of the connection of the outlet pipe to prevent it from falling off to avoid burns.
Shanghai Haozhuang is a comprehensive enterprise specializing in constant temperature experimental equipment, science and education instruments, manufacturing, sales and service. The main products are: artificial climate box, light (biochemical, mold, constant temperature and humidity, water isolation, shaking, carbon dioxide) incubator, water (gas) bath oscillator, oscillator, centrifuge, homogenizer, water (oil) Bath pot, water bath box, low temperature tank, magnetic (electric) stirrer, electric heating plate, environmental protection equipment, etc. The product is suitable for the fields of life science, medical treatment, colleges, electronics, chemical industry, agriculture, metallurgy, pharmaceutical and environmental protection, etc. Ideal replacement product for the laboratory. Sincerely cooperate with friends from all walks of life to create brilliant career!
The indoor hanging fireplace is a modern, fashionable and practical ornament with many advantages. First, it has a unique design and can be hung on the wall, saving space and providing more flexibility. Secondly, the indoor hanging fireplace can add warmth and comfort to the interior space, in addition, it can also act as a unique focal point, adding to the visual appeal of the room.
Indoor hanging fireplaces have a wide range of uses. Whether in a family home, apartment, holiday home or commercial premises, it can be used to provide warmth and beauty. It is suitable for all kinds of interior Spaces such as living room, bedroom, office and dining room. Because of its unique design, it can be installed and moved as needed, making it ideal for people who rent homes or need to move frequently.
Carbon steel is one of the commonly used materials for indoor hanging fireplaces. Carbon steel has high strength, wear resistance and corrosion resistance, and can withstand high temperatures and long periods of use. It also has an elegant look that is able to match a variety of interior decoration styles. In addition, the carbon steel material also has good thermal conductivity, which can quickly transfer heat and make the room warm rapidly.
Hanging & Suspended FAQS
1:What are the benefits of a suspended fireplace?
First of all, it can become the focal point of interior decoration, adding beauty and modernity to the room. Its unique design and position hanging in the air make it a striking artwork that can be a highlight of a room. Second, hanging fireplaces can save space. Compared with traditional fireplaces, it does not need to take up floor space and can be installed on the wall or ceiling, making the room more spacious and tidy. In addition, hanging fireplaces burn more efficiently and can provide more heat, making the room more warm and comfortable. Finally, the hanging fireplace can provide 360-degree views, allowing people to enjoy the beauty of the flames from different angles, enhancing the viewing.
2:Can my floating fireplace be wood-burning?
Yes, your floating fireplace can be wood-fired. You may choose to install a wood-burning fireplace so that wood is burned in the fireplace to generate fire and heat.
3:Can a central suspended fireplace be gas-fuelled?
Central hanging fireplaces can use natural gas as fuel. This type of fireplace usually has a modern design and can be hung in the center of the room. The use of natural gas fuel can easily control the size and temperature of the flame, and does not produce smoke and dust. At the same time, natural gas fuel is more environmentally friendly, does not produce carbon dioxide and other harmful gas emissions.
4:What is a ceiling suspended fireplace?
A hanging fireplace is a type of fireplace that is mounted on the ceiling. Unlike traditional fireplaces, hanging fireplaces do not need to be placed on the ground or fixed to the wall, but are suspended through a suspended ceiling. This design allows the fireplace to be more flexible in any location, whether in indoor or outdoor Spaces.
5:What is a wall-hanging fireplace?
A wall fireplace is a type of furnace mounted on a wall. It is usually made of metal and can be hung on the wall without the need for floor space. Wall mounted fireplaces use electricity or gas as fuel to generate warm air through heaters and fans. They usually have adjustable flame effects and temperature control functions that can be adjusted according to personal preferences and needs.
6:Why is carbon steel used for hanging fireplace?
Carbon steel is often used in the production of hanging fireplaces, mainly for the following reasons. First of all, carbon steel has good strength and durability, and can withstand the weight of the fireplace and the pressure of long-term use. Secondly, carbon steel has good thermal conductivity and can quickly conduct the heat in the furnace, so that the fireplace can quickly heat and provide a warm environment. In addition, carbon steel also has the characteristics of high temperature resistance, can withstand the heat and flame generated by high temperature combustion inside the fireplace, to ensure the safe operation of the fireplace. Finally, carbon steel has a lower cost and is relatively economical, making the production cost of hanging fireplaces more manageable.
7:Can I customise my suspended fireplace?
Of course you can customize your hanging fireplace! Custom fireplaces can be designed according to your preferences and home style. You can choose the size, shape, material and color of the fireplace to ensure that it blends perfectly with your room. In addition, you can also choose accessories for the fireplace, such as charcoal fire effects, temperature regulators and remote controls, etc., to increase the function and convenience of the fireplace. Custom fireplaces can meet your individual needs and bring warmth and comfort to your home.
8:How much does it cost to install a suspended fireplace?
The cost of installing a hanging fireplace varies depending on a number of factors, including the make, model, and material of the fireplace, the location and requirements of the installation, and the labor costs of the location. In general, hanging fireplaces usually cost between $1,000 and $5,000, not including installation costs. Installation costs are usually on a case-by-case basis and additional labor costs may be required. Therefore, it is best to consult a professional fireplace installation service provider to get an accurate quote.
9:How do I maintain a hanging fireplace?
A wall-mounted fireplace is a unique heating device that requires regular maintenance to ensure its proper operation and safety. Here are some tips for maintaining a wall-mounted fireplace:
1. Clean the casing: Clean the fireplace casing regularly to remove dust and dirt. You can use a soft cloth or vacuum cleaner to clean, avoid the use of chemical cleaners, so as not to damage the fireplace surface.
2. Clean glass doors: Wall mounted fireplaces usually have glass doors that need to be cleaned regularly to maintain transparency. Use a special fireplace glass cleaner, clean according to the instructions, and avoid scratching the glass with rough materials.
3. Check the combustion chamber: Check the combustion chamber of the fireplace regularly to ensure that no excessive ash or debris has accumulated. If you find a buildup, you can use a small brush or vacuum cleaner to clean up.
4. Check the flue: Check the flue of the fireplace regularly to ensure that it is unimpeded. If accumulation or blockage is found, it should be cleaned up in time to ensure smooth exhaust gas.
5. Regular maintenance: Regularly ask professionals to maintain and overhaul the fireplace. They can perform more in-depth cleaning and inspection to ensure that the various components of the fireplace are functioning properly.
Indoor Fireplaces,Wood Burning Stoves,suspended fireplace,Wood Burning Fireplaces,Modern Fireplace
Henan Jinbailai Industrial Co.,Ltd , https://www.jblbbqgrills.com