What is the ink printing decolorization tester?

The HD-A507 ink printing and bleaching tester produced by Haida Instruments is used to test the ink adhesion to judge the quality of the ink. This machine can do dry grinding test, wet grinding test, decoloring change test, paper fuzzy test and special Friction test. The Ink Abrasion Test is a test method designed to evaluate the abrasion or abrasion resistance of ink on paper or cardboard. Also known as ink decolorization tester, ink printing decolorization tester, ink decolorization instrument, ink friction tester, belong to the most typical of the printing detection instrument.

Ink printing and decoloring tester is used to test the abrasion resistance of printing ink layer, the abrasion resistance of PS plate photosensitive layer and the abrasion resistance of the surface coating of related products. Efficient analysis of problems such as poor rub resistance of prints, loss of ink layer, low print resistance of PS plate, and poor coating hardness of other products.

Design standards: JIS-5071-1, TAPPI-UM486, GB7706

Ink printing and bleaching test machine main technical parameters:

Operation method: microcomputer control, LED display test strip area: minimum size 230×50mm
Friction speed: 43 beats/min (adjustable at 21, 43, 85, and 106/min)
Friction load: 908g (2LB), 1810g (4LB)
Friction stroke: 60mm
Friction area: 50×100mm
Number of times setting: 0-9999 times automatic stop External dimensions: (L × W × H) 330 × 300 × 410mm
Machine weight: 35kg
Power supply: 1 ∮, AC220V, 60W

Article source: Dongguan Haida International Instruments without permission to prohibit reprint! (Or: if you need to reprint, indicate the source)