Ghosts: Unknown prints or shadows. Due to the uneven ink supply of the old printer.
Melon: In the era of typographic printing, the use of typographers was lower than the literal positioning of tablets.
Stacked colors: stacks of different ink colors, the overprint ratio of each color layer.
Play jindou: the bottom of the printing car has automatic paper-flipping device, bite the paper port printing surface, anti-biting paper tail printing bottom, at one go.
Reflexive: A printing method that saves printing plates. It is the same process as the printing plate and the back of the paper.
Flying ink: The printing press rotates fast and the ink body is not dense enough. The centrifugal force causes the ink to splash.
Inkline: Draw a ruled line on the printing plate so that it is printed on the paper gauge position and the needle position can be monitored at a glance.
Fouling: The printing plate is weak in water and becomes a lipophilic one. Of course, it starts with a thin layer of oil. The problem is that the pH of the water in the bucket is not correct.
Cannon: The action of the blanket cylinder leaving the impression cylinder.
Cartridge: Too much paper is sandwiched between the impression cylinder and the blanket cylinder, and the security sensor stops the printer.
Which residue: should not be printed on the ink, the problem is also the ink and water balance.
Snoring: The printing press stops rotating for many reasons, such as misfeeds or double-feed triggers.
Needle position: the edge position of the printed sheet. The length of the paper, printing registration and cutting need to have a needle position to align.
Even the sun: to save film continuous printing process. Use a register cross to move the exposure.
Bottom: The ink layer is too thick to dry, contaminating the back of the paper that is pressed against it.
Front: Printing speed.
Stone number: The name of the printing quantity in the lithograph era. Embossed paper once called a stone.
Used: The deputy of the printing press, or ç‡æŽ£.
Drafting: Pre-printing a proof of the official printing with a proofer.
Feeder: A feeding device for feeding paper by printing presses.
Melon: In the era of typographic printing, the use of typographers was lower than the literal positioning of tablets.
Stacked colors: stacks of different ink colors, the overprint ratio of each color layer.
Play jindou: the bottom of the printing car has automatic paper-flipping device, bite the paper port printing surface, anti-biting paper tail printing bottom, at one go.
Reflexive: A printing method that saves printing plates. It is the same process as the printing plate and the back of the paper.
Flying ink: The printing press rotates fast and the ink body is not dense enough. The centrifugal force causes the ink to splash.
Inkline: Draw a ruled line on the printing plate so that it is printed on the paper gauge position and the needle position can be monitored at a glance.
Fouling: The printing plate is weak in water and becomes a lipophilic one. Of course, it starts with a thin layer of oil. The problem is that the pH of the water in the bucket is not correct.
Cannon: The action of the blanket cylinder leaving the impression cylinder.
Cartridge: Too much paper is sandwiched between the impression cylinder and the blanket cylinder, and the security sensor stops the printer.
Which residue: should not be printed on the ink, the problem is also the ink and water balance.
Snoring: The printing press stops rotating for many reasons, such as misfeeds or double-feed triggers.
Needle position: the edge position of the printed sheet. The length of the paper, printing registration and cutting need to have a needle position to align.
Even the sun: to save film continuous printing process. Use a register cross to move the exposure.
Bottom: The ink layer is too thick to dry, contaminating the back of the paper that is pressed against it.
Front: Printing speed.
Stone number: The name of the printing quantity in the lithograph era. Embossed paper once called a stone.
Used: The deputy of the printing press, or ç‡æŽ£.
Drafting: Pre-printing a proof of the official printing with a proofer.
Feeder: A feeding device for feeding paper by printing presses.
This Machine is the dedicated Coating Machine for PET, BOPP film etc material conducting Coating processed, It is widespread applied to transferring Aluminium laminated films, Laser decoration film, Electrochemical aluminium film.
Automatic coating line is designed for peeling, color layer and secondary coating such as electrochemical aluminium, aluminized transfer film
unwind and reiwnd and driven adop servo motors, advanced digital control and tension floating roller which realized automatic control on the whole line dynamic tension, which greatly improve the precision and stability on the tension control.
Film Coating Machine,Paper Coating Machine,Diaphragm Coating Machine
SUNNY MACHINERY , https://www.stsunnymachine.com