Principle of automatic balancing centrifuge
The centrifuge drum rotates at high speed under the driving of the motor to generate centrifugal force, forcing the molasses to flow out through the small holes in the screen, and then flow to the original and the honey-washing box by gravity; and the sugar particles are blocked by the screen to reach the sugar, The purpose of honey separation.
The automatic balance centrifuge adopts microcomputer control, touch panel, digital display, DC brushless motor direct drive, electronic door lock and other advanced technologies. Its characteristics are: due to the special damper, the vibration reduction effect is good, with automatic balance function. The speed is controlled by PWM, the speed control is high, the user can choose different rising and lowering time, the brushless DC motor makes the whole machine run quietly, meets the requirements of the laboratory, no need to replace the carbon brush, no carbon Powder pollution.
The automatic balance centrifuge has 10 kinds of program storage functions, and can automatically calculate the RCF value; it has three horizontal rotors, replaceable pipe racks, and many tube numbers, which is convenient for users to choose; electronic door lock safety protection function: when the door cover is not covered The centrifuge does not work. Place the centrifuge on a flat table or flat table, visually balance it, and gently shake the centrifuge by hand to check if the centrifuge is in balance. Plug in the power outlet and press the power switch (the power switch is on the back of the centrifuge, above the power base). Press the "stop" button to open the door cover <not connected to the power supply, pull the cable at the lower front of the centrifuge>. Put the centrifuge tube into the rotor, the centrifuge tube must be placed in even number of symmetry (the centrifuge tube test liquid is evenly measured), pay attention to tighten the nut on the rotor body, and re-examine the above steps, then gently rotate the rotor body by hand. The centrifugal tube rack is operated flexibly. Close the door, be sure to lock the door, and check if the door is closed by hand.
Automatic balance centrifuge maintenance and maintenance
The drive shaft should be coated with a little butter or petrolatum or grease to prevent rust. And easy to take out the rotor.
If the centrifuge tube breaks or there is a separate drop into the rotor, it must be washed with water in time, carefully dry, especially at the bottom of the hole.
Check the rotor for corrosion spots, small cracks, and check before use.
The centrifuge tube should be updated.
At the end of use, the water stain in the centrifuge chamber should be dried, and the dirt on the centrifuge chamber and the rotor should be cleaned. The rotor should be taken out and placed in a clean and dry place.
Kitchen Storage Accessories, Amazon Kitchen Storage Accessories, Stainless Steel Kitchen Storage Accessories
Fucheng Metals Production Co., Ltd. of Jiangmen City , https://www.fcmp.com