What are the technical bottlenecks and operating bottlenecks in solid wood custom furniture enterprises?

Custom furniture can be divided into two categories: panel customization and solid wood customization. The plate customization process is relatively simple. Because the panel custom furniture uses a paint-free board, the board can be cut directly when customized, while the solid wood custom furniture needs to be painted.

Paint is an indispensable part of the production of solid wood finished furniture, and it is also a part of the production process. Customized furniture is now popular in the market, and consumer demand for solid wood custom furniture has spawned a new market supply.

However, the production of solid wood custom furniture is a test of the strength of the manufacturer, and some well-known manufacturers can not get the order for solid wood customization. So what technical bottlenecks and business bottlenecks do solid wood custom furniture companies need to break through?

Measuring tape off

The first difficulty in custom furniture is the accuracy of the scale, especially solid wood furniture, which is expensive, and if the size is wrong, it is difficult to repair, and the damage caused can be fatal.

In order to solve this problem, we must first strictly check the dealers. The dealer is the window of the manufacturer. Once the dealer makes a mistake, the manufacturer is often difficult to remedy as a back end.

In order to strictly control the scale, some manufacturers have set up three fire prevention measures. Dealer, designer scale, software audit, manual review by the manufacturer's technical department. Layers are checked to minimize human error in the bud.

Information management

For large-scale customized enterprises, information must be passed. Now there are professional software for customized factories, but these softwares are applied to various manufacturers, and various amendments are needed to make workers practical and master, so that all departments work together. This process is time-consuming and laborious, but this informationization Management is a must.

The past manual mode must be changed. It's hard to imagine a large-scale custom factory that relies on manual work to respond to market demands. As one person in charge of the factory said: Any careful operation of the human hand will go wrong. If one hundred people make a mistake every day, the accumulated error rate is unacceptable to the factory. Information management can reduce errors to almost negligible.

Paint off

Paint is the biggest headache for most factories, especially in the context of environmental protection.

VOC emissions will occur during the paint process, and the environmental protection department has strict requirements. The manufacturer must carry out the transformation of the relevant production line. Especially in the case of the use of water-based paints, the paint is almost an insurmountable threshold for most manufacturers.

The technical aspects of the paint link are difficult, and the production difficulties are one by one. The pressure on the technical team of the company is enormous. The water-based paint is not very mature in terms of technology at present, and it is inevitable to pay tuition fees in the actual production process. It is necessary to have patience and financial strength. It is not easy to break through this difficult situation.

Machining accuracy

According to reports, in the production process, custom furniture often has troubles in the field because of insufficient processing precision.

The so-called difference is a thousand miles, lost a thousand miles. Very few errors are cumulative and considerable. At present, the processing precision of furniture factory panels can not meet the needs of custom furniture in millimeters. Millimeter-level errors, which accumulate, can make field installation very difficult.

Machining accuracy must be accurate to the micron level. Higher machining accuracy requirements are a huge challenge for mechanical equipment. The equipment is not sophisticated enough to meet the needs of the market.

The overall impression of the furniture factory is that the dust is flying. At present, strict environmental protection requirements have made the factories with less strict dust control face big problems: either rectification is in place or closed.

Dust collection and treatment is not easy for people to imagine. Good dust collection equipment involves explosion-proof and flame detection devices in the post-process, and it takes a lot of money to purchase a fully compliant, forward-looking, high-standard dust collection device.

Targeted operation

Because it is custom furniture, many dealers will blindly order, even in the factory, it is difficult to maintain a large number of high-priced orders, they often say the next.

The blind expansion of business categories and the production of inexperienced products have lengthened the product line and disrupted the production order, which has reduced the overall profit of the factory.

The current market is full of custom-made hot items, and the sales process often blindly orders, which makes the production process difficult to deal with, either the product is unqualified, the consumer is not satisfied, or even complains; or the production cost suddenly rises, no profit at all.

Even if the whole house is customized, we must do our own products and products that can be done. We must not blindly expand the categories and be led by the market.

Whole house customization, also need to make a choice, to achieve targeted operations, focus on management, in order to be profitable and healthy development.

For more information on furniture, please pay attention to the official website of Xianghe Furniture City http://