[ Chinese wardrobe net ] The wardrobe is composed of cabinet, door panel and hardware. What kind of board is used to make the wardrobe? Generally speaking, when the decoration is to be done, there are several kinds of plates, and the small series is shared for everyone:
Making a wardrobe sheet 1. Plywood
A plywood is a plate-like material formed by gluing a veneer or a veneer formed by spin-cutting a piece of wood. Commonly there are three plywood, five plywood, nine plywood and twelve plywood (commonly known as plywood, plywood, nine plywood, twelve plywood). Plywood has common defects such as low bonding strength and partial opening, plywood warping.
Making a wardrobe sheet 2. MDF
MDF, there are several, there are many thicknesses, if the wardrobe is generally 1, 2 or 1.5, but the board of the wardrobe is generally called his composite board, there is a single side, two-sided distinction, there is a pattern How much to make with a composite board will make you see some nail holes, not beautiful. MDF oilers are the most convenient, and the construction is between the two.
Wood board can be spliced, nailed, screwed, and the most convenient for construction, but surface treatment is the most troublesome of these. The moisture-proof board is a particle board. Nowadays, it is often seen on the market, it is not covered with paint, and the cost is low. It is often used to make cabinets.
Making a wardrobe sheet 3. Large core board
The cabinet core is made of 12% large core board, which is made of fireproof board or waterproof wood grain paper. The appearance of the 3 cm color panel (there are: Sapele / Blackberry / Red Tan / Elm, etc.) depends on your own personal preference.
There is also a large core board to be attached to the panel, the panel will definitely be painted, the cost and the composite board are completely divided. Of course, in terms of hardness, the quality will definitely be much better. It is better to use the large core board for the wardrobe. The strength of the same level of the finger joint board is not high, but the span of the wardrobe is relatively large, and the required strength is relatively high. If you want to use the direct board, the strength is higher. Sealing the panel, then the cost will increase accordingly.
Making a wardrobe sheet 4. baking sheet
The base of the baking varnish is a MDF, and the surface is baked at a high temperature by six spray-baked imported lacquers (three bottoms, two sides, one light). The 'baked paint' currently used for wardrobes only describes a process in which the paint is treated with a paint-treated substrate door panel that is heated and dried in a drying oven. The paint board is characterized by bright color and easy shape, strong visual impact, very beautiful and fashionable, excellent waterproof performance, strong anti-pollution ability and easy to clean. The disadvantage is that the process level is high and the rejection rate is high, so the price is high; the use should be carefully taken care of, fear of bumps and scratches, it will be difficult to repair once the damage occurs, and the whole should be replaced; the kitchen with more soot is prone to appear. Color difference.
Making a wardrobe sheet 5. Fireproof sheet
The fireproof panel door panel is the most widely used door panel material. Its color is relatively bright, and the edge sealing form is various. It has wear resistance, high temperature resistance, smash resistance, penetration resistance, easy cleaning, moisture resistance, no fading, delicate touch and reasonable price. Etc.
The fireproof door panel substrate is a particle board, a moisture-proof board or a density board, and the surface is decorated with a fireproof board veneer. The price of domestic fire door panels is lower, and the cost of Korean and German plates is increased by 25% and 50%.
The fireproof board conforms to the development trend of the combination of “beauty and practicality†of the wardrobe, so it is prosperous in the market. The disadvantage is that the door panel is a flat plate, and it is impossible to create a three-dimensional effect such as bumps and metal, and the fashion sense is slightly worse.
The fireproof board is a decorative board made of a silicon material or a calcium material as a main raw material, mixed with a certain proportion of fiber materials, lightweight aggregates, binders and chemical additives, and subjected to autoclaving technology.
Making wardrobe plates 6. Solid wood panels
The use of solid wood to make wardrobe door panels, the style is mostly classical, usually at a higher price. The door frame is solid wood, mainly cherry wood, walnut, and oak. The door core is a medium-density board with a solid wood skin. In the production, the surface of the solid wood is generally embossed and painted, so as to maintain the color of the wood and the shape is beautiful. This can ensure the special visual effect of the solid wood, and the combination of the frame and the core board can ensure the strength of the door panel.
Making a wardrobe sheet 7. Particleboard
The particle board takes the plantation, the trunk of the natural forest, the shaving of the branches or the shavings, which are formed at high temperature and high pressure. The advantage is that the expansion rate is small, the stability is strong, and the price is cheap. The disadvantage is that the edge holding force is small, the strength is not enough, and the vision is rough.
Understand the advantages and disadvantages of the various panels of the wardrobe, for the board to do the wardrobe, I must have my own answer, the information is for reference only!
Wardrobe is a cabinet-style furniture for storing clothes. It is generally divided into single door, double door, embedded, etc. It is one of the commonly used furniture in the family. However, the material used to make the wardrobe is also very important, because nowadays many furniture are polluted and will cause harm to people's bodies. Moreover, it is a wardrobe for people's clothing. What kind of board is used for the wardrobe? Let's learn from the following. Let's have a look.
1, composite solid wood, moisture-proof board, solid wood paint-free board: both moisture-proof, environmentally friendly, and cost-effective. The national cabinet products have experienced more than ten years of development. More than ten years of experience can be used to determine the wardrobe's moisture-proof board is the best choice! The moisture-proof board of the cabinet can be used in heavy and humid environment, showing its high quality. Due to the more fragile surface, the requirements for production equipment are higher. The new wall is decorated and painted, and the wall will have a small amount of water. After the whole wardrobe is installed, it cannot be ventilated, and the back part of the wardrobe needs a plate with better moisture resistance. The moisture-proof board is immersed in water. Because of the long wood fiber and the green moisture-proof agent, the immersion expansion will not expand until it is soaked to a certain extent. Therefore, the moisture-proof board of most brand cabinets is the main material of the cabinet, which is reasonable.
2. Regular manufacturers produce particleboard and MDF: Particleboard produced by the same material is more environmentally friendly than MDF. In fact, the reason is simple: molding wood, no glue, environmental protection is definitely nothing to say. If the amount of glue used to cut into 1 piece and 5 pieces is different, the less glue is, the more environmentally friendly it is. MDF is also called MDF. It is pressed by wood powder and has better flatness. It is more suitable for boring and milling. It is usually used to make door panels, such as baking varnish and moulding (blistering). There is also a softer material for MDF, which is less prone to blasting when sealing, and easier to process, so many small factories use medium denier. In terms of moisture resistance, the particle board is much less resistant to moisture than the moisture-proof board, and the green core moisture-proofing agent is less. If it is in a humid environment for a long time, the wood is prone to mold and decay. The raw material of the MDF is wood flour. The MDF is soaked in water and will swell like a cake.
3, small factory low-cost production of particle board: Most small manufacturers consider the cost, generally using particle board (that is, solid wood particle board), using ordinary glue, the lowest cost among the three materials.
4, ecological board: (refers to the ecological board produced by small workshops) large core board or sandwich board plus double-sided paste tri-ammonia surface! Quality: sandwich board (commonly known as blockboard, wood board) is solid wood core Plywood, which cuts the logs into strips, splices into cores, and is made of outer surface materials. The force of the whole board comes from the thin two-layer outer veneer, and the middle is the splicing of the wooden blocks. The substrate is basically free from force. It is easy to break and deform. Most of the plates are made of fir for one or two years. As long as the pieces are broken with fingers, the nail holding power is several times lower than the national standard.
Environmental protection: The advantage of the ecological board is that the substrate looks good. It feels like wooden blocks. The name of the ecological board is also very good. It also has the feeling of environmental protection. Everyone knows that the environmental protection standard of the board is mainly glue, and the environmentally friendly E0. The cost of E1 glue is very high. The small-scale factory will never use this kind of environmentally-friendly glue, all of which use industrial glue, and the cost is relatively low. Almost all large-scale brands in the national furniture market will not use ecological boards or fir boards. Before 2005, almost all the new homes were decorated with sandwich panels, almost all of which exceeded the standard. Since the rise of the large wardrobe brand, the use of moisture-proof panels and MDF, it is rare to hear environmental standards.
The plates mentioned above are all suitable materials for the wardrobe. I hope everyone can help you after understanding. If you want to know more about the wardrobe, you can log in to learn more.
The pneumatic Standing Desk is a simplification of the automatic lifting table. It eliminates the need for a motor or compressor, and adjusts the air pressure bar manually to achieve the function of lifting
advantage:1. Low price and high cost performance 2. No need to connect to electricity, no oil, good safety.
Disadvantages:1. The stability is not high 2. It takes a little effort to raise and lower, and some buttons need to be lifted by hand to achieve the purpose of up and down.
Pneumatic Standing Desk,Adjustable Office Desk,Standing Computer Desk,Office Desk Adjustable Table,Lifting Desk Pneumatic
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.up-lifting.com