Decoration tips

The door is equipped with two layers for sound insulation, one security door and one wooden door, but there is no gap under the wooden door, so if you want to put the door mat in the door, you can only lay a thin layer of cloth. .

Door and window

Regret one: the door is installed for sound insulation two layers, one security door, one wooden door, but there is no gap under the wooden door, so the door to the door should be placed on the door mat, only a thin A layer of cloth.

Regret 2: Nowadays, many families have removed the isolation door of the room and the balcony in order to increase the living room area. In fact, this is very bad. One of the biggest problems is that the room is very large. There is often a dusty day in Beijing spring. After the partition is cut off, there is a smell of earth at night.

Regret 3: The roof of the sun room should be equipped with a movable window, which is convenient for cleaning, but now it is completely dead, cleaning is difficult, sometimes you have to take a water pipe to spray water to clean.

Regret 4: Install the plastic steel window, the screen window must be added with steel lining, otherwise the time will be concave and the two sides will be deformed. I don't know when I first installed it. You will find this problem after using it.

Sanitary ware

Regret one: the shower must be bought well, otherwise the water flow is very uncomfortable. At that time, I bought a very famous brand shower in Germany. The price was very expensive. I spent more than 5,000 on one, but it was really easy to use. At that time, the seller told me that if you use this shower, you will never think of another place to take a shower. I didn't believe it at the time. Now I think about it. It is true. It is not like taking a bath at home, because the shower is different.

Regret 2: Do not install glass basins. Although the glass basin is beautiful, it is not suitable for the north. Because the water in the north is large, it is easy to leave a mark. It is impossible to scrub once. If it is not scrubbed, it will be dirty. When I lived in Jinmao Tower in Shanghai, I found it very beautiful. I went home and installed one. The result was dirty.

Regret three: buy building materials can not only look at the brand, to see the function. Know the product features and buy again. Such as toilets, there are straight row, siphon, 3 liters, 6 liters of water. Initially I bought a good brand and found that 3 liters of water was not clean. Later, after changing a domestic brand, it was only a few hundred yuan, and 3 liters of water rushed very well.

Regret 4: It is better to choose the toilet to silence the sound. Now the toilet is too loud when it is flushed, especially when the sound is louder at night. When the water is flushed at night, the loud noise from the water makes the upstairs and downstairs The four neighbors are affected.

Wall class

Regret one: The white wall will never let you regret it. The original decoration always thought of a house brush a color, I feel that this is very sentimental, in fact, it is not the case. For example, pink or wheat, light rose, as long as the color is stained, you can feel dizzy with a fluorescent lamp at night.

Regret 2: Decoration must pay attention to practicality, not just good looks. There was a flue in the wall of my cabinet. At that time, the decoration was for color matching, and the paint was painted. Now the cooking oil is very badly cleaned.

Regret 3: The more the bedroom paint color is, the more uncomfortable it is. I thought it was quite good. I chose the barley color. It was very popular abroad. We also think that this color is more suitable for our family, but now it looks very old, and friends say no. well. This is the biggest regret of my decoration.

Furniture

Regret one: decoration must be considered overall, less decoration and more decoration, do not do too much woodworking, especially cabinets, package heating, etc., because after the completion of the decoration, all the cabinets and other items that need to be done, the furniture factory can Customized by size. The furniture can be thrown away after a long time, but it is difficult to change the woodwork done during the renovation. Some of the woodwork and the wall are integrated into one, and it is even harder to change.

Regret 2: I made a set of cabinets against the wall. I didn't want to put the bed in this house. After the cabinet was finished, I felt that the bed still had to be placed in this house, but the cabinet was already done and it was integrated from top to bottom. It is very difficult to change.

Regret three: I just bought a house, the decoration is called high, ceiling, heating, furniture, the longer I can live, the more I feel that everything except the bed and dinner table is superfluous.

Decoration team

Regret one: Do not choose a small decoration company, because there is nowhere to go to find a problem. For example, there is an empty drum phenomenon after the floor tiles are laid out; problems such as paint cracking on the wall and the door after painting can not be compensated. Since these problems were discovered after the renovation, it is necessary to find a decoration company to re-process, but the small company could not find it.

Regret 2: Decoration Do not look for fellows, acquaintances, relatives, these people are very good on the surface, let you rest assured, in fact, the decoration has to stare, because the people who work are not working for their own home, there will always be some problems. I just because the acquaintances were too reassured, and they were all handed over to them. As a result, the windows were not sealed for less than a year, and the window frames were loose. I had no choice but to disassemble them.

Brick

Regret one: After the renovation, the tiles must leave a few spares. Now most of the consumers have disposed of the excess bricks after the renovation. After a year or two, if the bricks are accidentally broken, one or two pieces will be damaged. It is too difficult to match the bricks of the same specifications and colors. Some labels have not been produced, and it is not good to change other colors! No way, it would be nice to leave a few spare bricks in the first place.

Regret 2: The floor tiles must be selected with good quality, and the wall tiles should be carefully selected. If the selection is not good, there will be follow-up troubles. For example, bad floor tiles are very easy to absorb water. Once you accidentally put water and stains on the floor tiles, you will suck in them and it is difficult to clean them up. Then there is no need to buy white light tiles, this is my experience, the floor tiles should buy matt and dark.

Regret 3: If there is a mosaic, you must buy more grouts, and the place uses a special fee. I just heard the words of the first person who sold the mosaic place, bought less, and later made up.

waterway

First, tell everyone to prepare for the change of water!

1 First, do the water shut-off experiment. If you find that there is a leak, you can find the property to solve the problem and find the problem early maintenance.

2 The designer has a general overall plan for the placement, brand and location of the home water purifier, kitchen and bathroom.

3 When setting up the cabinet, install the water purifier, the pedestal basin or the basin, and the required outlet position is fixed.

4 Decide whether to use electric water heaters or burner water heaters, boilers and solar energy. Electric water heaters need to be branded and sized.

5 Whether you choose a bathtub or a shower, a bathtub or a whole bath room, you need to set the specifications and dimensions before changing the water.

Waterway renovation is mainly for showers, wash basins, washing machines, sinks, water heaters, solar energy, mop pools, toilets, water purifiers, etc., so that it is not suitable for change after the change.

Second, the common problems and acceptance of waterway reconstruction

1. The wall is not slotted (there may be steel bars in the wall), and the hot and cold water pipes are exposed to the wall, which affects the tile.

2. When the floor hot and cold water pipes are stacked across the bridge, the position is not considered, affecting the thickness and slope of the floor.

3, when the water heater hot and cold water pipe is not piped, the pipe is not according to the model of the water heater. There is an error or incorrect position during actual installation.

4. The height of the wall type hot and cold water faucet is unreasonable, and the center distance of the faucet is not correct, usually the center distance is 15 cm. After the tile is attached, the faucet cannot be installed.

5. After the installation of the hot and cold water pipes, the pressure test must be carried out, and the test pressure is 8 kg for 20-30 minutes.


Third, the bathroom renovation waterway transformation common small problems

1. If you decide to open the slot on the wall, it is best to ask the property first. Can you open the slot where you want to take the pipe?

2. The hot and cold water interface left for the shower faucet must be adjusted to the angle when tiling. It is prevented that the water pipe joint has been fixed when the tiling occurs, and the pain of the planing brick cannot be installed because of the angle problem.

3, the water inlet interface for the toilet, the position must be adapted to the height of the toilet tank from the ground, if left high, there may be conflicts when the toilet is finally installed.

4. At the wash basin, if the column basin is installed, pay attention to the distance between the hot and cold water outlets. Do not install the column basin. The width of the column of the column basin cannot cover the hot and cold water pipes. From the front of the column basin, Can see water pipes on both sides.

5, in addition to the bathroom to leave the faucet to the washing machine, it is best to leave a faucet interface, so that you want to pick up the convenience of watering flowers in the future. This problem can also be solved by purchasing a shower with a tap


Before installing the waterway (cabinet design), you want to install the water purification equipment (softener, water purifier, pure water machine). Be sure to reserve a good position and design in advance. You can also consult any technical questions about water treatment. !!

Why do you need a water purifier?

With the industrialization process of modern society, the application of various technologies is becoming wider and wider, the consumption of various energy sources is getting larger and larger, the pollution is getting more and more serious, and the environment is getting worse. Scientific research finds that modern tap water cannot be used. These health standards are met because modern tap water contains harmful substances such as chlorine, chemical fertilizers, heavy metals, and bacteria. Chlorine is the main bactericidal substance in tap water, but excessive chlorine may cause toxic pneumonia and pulmonary edema, aggravate hypoxia, and easily cause symptoms such as pharyngitis, bronchitis, cough, and shortness of breath. The chemical is infiltrated into the water through the soil and contains carcinogens such as nitrate nitrogen and phosphorus potassium. The heavy metals such as iron, manganese, zinc and copper are likely to cause chronic poisoning, bone pain, renal vascular sclerosis, renal acid syndrome, hypertension, heart disease and the like. At the same time, the water pipeline will rust after many years, and the tap water also contains residual bacteria, which is very harmful to human health. Therefore, we need to install an effective water purification device at the water terminal to filter the modern tap water. Thereby producing healthy and safe drinking water.

Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }

Meat Processing Machines

As one of the earliest enterprises specializing in meat food processing machinery, Helper Group integrates research and development, production, sales and service in the modern management system. Our company has now set up scores of equipment used in the field of meat processing such as frozen meat breaker series, meat block grinder series, chopper and mixer series, saline injector series, tumbling machine series, smoke oven series, filling machine series, sausage linker series, clips tying machine series etc.We also provide sausage lines,vacuum sausage filler,vacuum stuffer.



meat processing machines overview

Sausage Separator Series,Chopper And Mixer Series,Clipping System Solutions,Sausage Lines,Vacuum Sausage Filler,Vacuum Stuffer

Helper Machinery Group Co., Ltd. , https://www.ihelpergroup.com

Posted on