In the furniture market, panel furniture has always occupied half of the country. Many people think that panel furniture is not environmentally friendly in solid wood furniture. In fact, this is a misunderstanding. The core material of the panel furniture is medium-density fiberboard or particleboard, and the surface is veneered. From the raw material intake, it saves forest resources more than solid wood furniture. Fine-fashioned panel furniture is naturally expensive.
Panel furniture usually uses metal hardware, which is very convenient to install and disassemble. It can be disassembled and installed many times with high processing precision. Therefore, pay attention to the quality of hardware when purchasing panel furniture. The disadvantage of panel furniture is that some manufacturers produce materials such as particleboard, and if the veneer is not all-inclusive, it is easy to release formaldehyde.
The quality of the panel furniture is judged by the manufacturing process of the panel furniture, which is relatively easy to make. For example, in the combination part, the hardware connector should be of high quality, and its own adhesion and adhesion to the furniture should be ideal. For the overall structure of the furniture, each connection point, including the connection points between horizontal and vertical, must be tight, no gaps, and no looseness.
For example, the surface treatment, the open paint treatment, wood grain, wood brown eyes must be presented, with a three-dimensional sense. When the sealed paint finish is applied, the surface feels like a piano topcoat. Whether it is clear oil, oil blend, matt, high gloss or flat light, the cleanliness, smoothness and hardness of the paint must be high. If it is veneer veneer, it must be done that the surface of the veneer should be flat and not foaming; there should be no traces of complementary color on the veneer; the grain of the veneer is dense, and there is no gap in the splicing, the pattern must be correct. Can have these three conditions, from the perspective of the production process, it is a good veneer furniture.
Panel furniture 3 kinds of veneer veneer veneer: use the thin wood skin to treat the surface, giving people the same appearance as solid wood furniture, the color is bleak, the texture is clear, the service life is long, the artificial substrate is not deformed, cracked, and the cost is low. The current standard veneer veneer is 0.6mm.
Wood grain paper veneer: It is made of modern laser typesetting technology and imitation wood grain road. It has simple process, high temperature resistance, not easy to wear, and the cost is lower than wood veneer.
Paint film: Veneer furniture is generally made of polyester paint, varnish, matt paint, resin paint, etc. The furniture surface paint film protects the substrate while beautifying the surface decoration. Therefore, protecting the paint coating on the surface of the furniture actually protects the decorative beauty of the furniture surface and protects the inherent quality of the furniture. Extended service life.
The five features of the panel furniture are high temperature resistant, the paint surface is firm, and it is not easy to wear, deform and crack.
The color and texture are evenly distributed, there is no color difference, and the appearance is beautiful;
Good moisture resistance, furniture will not be deformed in wet places;
Flexibility, styles can be ever-changing;
High resource utilization, good process performance, easy to process in large quantities, and low cost.
TIPS: Maintenance of panel furniture When there is dust on the surface of the furniture, use a soft towel to wipe it. If there is stain on the surface, it can be removed by sanding.
Avoid direct sunlight, so as to avoid oxidation of the surface paint film, furniture turns yellow, and color difference occurs;
Pay attention to the maintenance of the paint film, do not use sharp things to bump the furniture;
Avoid contact with corrosive liquids on the furniture surface, such as alcohol, banana water, gasoline, nail polish, strong acid, alkali, etc.
Panel furniture usually uses metal hardware, which is very convenient to install and disassemble. It can be disassembled and installed many times with high processing precision. Therefore, pay attention to the quality of hardware when purchasing panel furniture. The disadvantage of panel furniture is that some manufacturers produce materials such as particleboard, and if the veneer is not all-inclusive, it is easy to release formaldehyde.
The quality of the panel furniture is judged by the manufacturing process of the panel furniture, which is relatively easy to make. For example, in the combination part, the hardware connector should be of high quality, and its own adhesion and adhesion to the furniture should be ideal. For the overall structure of the furniture, each connection point, including the connection points between horizontal and vertical, must be tight, no gaps, and no looseness.
For example, the surface treatment, the open paint treatment, wood grain, wood brown eyes must be presented, with a three-dimensional sense. When the sealed paint finish is applied, the surface feels like a piano topcoat. Whether it is clear oil, oil blend, matt, high gloss or flat light, the cleanliness, smoothness and hardness of the paint must be high. If it is veneer veneer, it must be done that the surface of the veneer should be flat and not foaming; there should be no traces of complementary color on the veneer; the grain of the veneer is dense, and there is no gap in the splicing, the pattern must be correct. Can have these three conditions, from the perspective of the production process, it is a good veneer furniture.
Panel furniture 3 kinds of veneer veneer veneer: use the thin wood skin to treat the surface, giving people the same appearance as solid wood furniture, the color is bleak, the texture is clear, the service life is long, the artificial substrate is not deformed, cracked, and the cost is low. The current standard veneer veneer is 0.6mm.
Wood grain paper veneer: It is made of modern laser typesetting technology and imitation wood grain road. It has simple process, high temperature resistance, not easy to wear, and the cost is lower than wood veneer.
Paint film: Veneer furniture is generally made of polyester paint, varnish, matt paint, resin paint, etc. The furniture surface paint film protects the substrate while beautifying the surface decoration. Therefore, protecting the paint coating on the surface of the furniture actually protects the decorative beauty of the furniture surface and protects the inherent quality of the furniture. Extended service life.
The five features of the panel furniture are high temperature resistant, the paint surface is firm, and it is not easy to wear, deform and crack.
The color and texture are evenly distributed, there is no color difference, and the appearance is beautiful;
Good moisture resistance, furniture will not be deformed in wet places;
Flexibility, styles can be ever-changing;
High resource utilization, good process performance, easy to process in large quantities, and low cost.
TIPS: Maintenance of panel furniture When there is dust on the surface of the furniture, use a soft towel to wipe it. If there is stain on the surface, it can be removed by sanding.
Avoid direct sunlight, so as to avoid oxidation of the surface paint film, furniture turns yellow, and color difference occurs;
Pay attention to the maintenance of the paint film, do not use sharp things to bump the furniture;
Avoid contact with corrosive liquids on the furniture surface, such as alcohol, banana water, gasoline, nail polish, strong acid, alkali, etc.
NINGBO HOZ TRADING CO.,LTD , https://www.hoz-kitchenware.com