After finishing the film, the printed matter can improve the quality of the printed matter. In general, the film is divided into two types: one is a matte film and the other is a glossy film.
Lamination is a process in which a plastic film such as polypropylene is coated on the surface of a printed product and an adhesive is heated and pressed to bond them together. The coating process is divided into two types, a pre-coating film and a coating film. The precoat film is pre-coated on a plastic film and dried and wound up. Afterwards, the laminate of the printed matter can be completed by hot pressing in the case of an adhesive. That is, the coating film is to use the adhesive simultaneously when coating the film.
Membrane method is divided into "cold" and "hot", "cold" is the use of glue and cold heading machine pressure photos and film and backplane bonded together; and "hot" is by heat The high temperature and high pressure of the machine are used to complete the photo decoration. In contrast, the cost of cold heading is lower, but the effect of enthusiasm is better, and the photo preservation time is longer after installation.
Finished film prints look better, and the grades are also very high. Almost every print needs film. In the printing industry in Langfang, printing is almost separate from the laminating factory, so it is more professional.
Lamination is a process in which a plastic film such as polypropylene is coated on the surface of a printed product and an adhesive is heated and pressed to bond them together. The coating process is divided into two types, a pre-coating film and a coating film. The precoat film is pre-coated on a plastic film and dried and wound up. Afterwards, the laminate of the printed matter can be completed by hot pressing in the case of an adhesive. That is, the coating film is to use the adhesive simultaneously when coating the film.
Membrane method is divided into "cold" and "hot", "cold" is the use of glue and cold heading machine pressure photos and film and backplane bonded together; and "hot" is by heat The high temperature and high pressure of the machine are used to complete the photo decoration. In contrast, the cost of cold heading is lower, but the effect of enthusiasm is better, and the photo preservation time is longer after installation.
Finished film prints look better, and the grades are also very high. Almost every print needs film. In the printing industry in Langfang, printing is almost separate from the laminating factory, so it is more professional.
Pvc Flat Soaker Hose,Brass Pvc Irrigation Hose, Three Tube Sprinkler Hose,Brass Flat Soaker Hose
ZHEJIANG HAOCHUAN RUBBER &PLASTIC CO.,LTD , https://www.zjhaochuan.com