Aluminum paste is widely used in automotive paints, motorcycle paints, bicycle paints, plastic paints, architectural coatings, inks, cell phone cases and buttons, electrical and mechanical enclosures, electrical enclosures, metallic paints, and many other fields, but insoluble in water-based paints, silver paste It is a solvent type.
The method of using the aluminum silver paste is to add an appropriate amount of organic solvent to the silver paste, stirring slowly, and the excessively quick stirring will destroy the surface coating of the silver paste. Thoroughly soak, disperse, and unseal, use as soon as possible, and seal well.
Aluminum paste should not be exposed to sunlight, contact with rain, and should be stored in a dry room (35 degrees below) Storage time should not be too long. Once unpacked, it should be used as soon as possible. If it cannot be used once, it should be completely Seal to prevent the solvent in the aluminum paste from evaporating away. Keep it for too long. Please check before use.
Anti-static Plastic Bags in the electronics industry, the main form of static electricity damage is caused by electrostatic discharge components of the mutation failure and potential failure, and then cause the overall performance of the decline or failure. Therefore, the main purpose of electrostatic protection and control should be to control electrostatic discharge, that is, to prevent the occurrence of electrostatic discharge or to reduce the energy of electrostatic discharge below the damage threshold of all sensitive devices. In principle, electrostatic protection should be controlled from the generation of static electricity and Controlling the dissipation of static electricity in two aspects, controlling the generation of static electricity is mainly to control the selection of materials in the process and process; controlling the dissipation of static electricity is mainly to quickly and safely discharge and neutralize the static electricity; It is possible that the static electricity level does not exceed the safety limit to achieve the purpose of electrostatic protection. The following describes the types and characteristics of several anti-static Plastic Bags in the electronics industry.
1) Shielded anti-static sealed plastic bag: It is made of polyethylene and Germany imported antistatic agent and blown by special machinery. It is easy to pack and close with your fingers.
2) PE red anti-static plastic bag: The anti-static plastic bag is the best packaging material for printed circuit boards, so that the static electricity generated by the printed circuit board can be reliably released to avoid damage.
3) Anti-static shielding plastic bags: In order to make plastics can shield electromagnetic waves, antistatic agents should be used for metallization of plastics, which has a good shielding effect.
4) Anti-static bubble plastic bag: Anti-static bubble plastic bag and bubble chip can prevent the product from being damaged due to impact or static electricity during production, handling and transportation. This bag is suitable for the packaging of electrostatic sensitive electronic products.
5) Anti-static and moisture-proof plastic bags: It is suitable for the transportation and packaging of electrostatic sensitive high-tech electronic products such as PCB and IC.
6)Anti-static aluminum plastic bags . anti-static PE plastic bags and so on!
Anti-static Plastic Bags
Anti-static Plastic Bags,Anti-Static Moisture-Proof Plastic Bag,Anti-static Bubble Bag,Anti-Static Shielding Bags
Shenzhen Yanhua Packing Products Co., Ltd. , https://www.yhpackagingbox.com