1. Look at the quality of the cabinet, the most important thing is to look at the edge of the board . Machine edge seals are generally uniform, while hand seals have some roughness, and large furniture factories generally use machine edge seals.
2. For the price of the cabinet, first ask the manufacturer's calculation method, and then ask the item included in the fee . For example, whether the cost of the drawer is included (usually the unfolding area algorithm does not include the cost of the drawer, the algorithm for the projected area may or may not be included), whether the backplane is included, and the like.
3. Select the cabinet, you must choose the brand . Branded cabinets, the quality is guaranteed, and some small manufacturers use a few boards to make up for it, you can sell it as a wardrobe, such a manufacturer has a problem and then look for it, I am afraid it will be difficult.
4. The structure design and the cooperation of the door .
Pay special attention to the cooperation between the cabinet structure and the door when selecting the combination wardrobe. First of all, whether it is for the manufacturer or the decoration company to make the cabinet, the position of the drawer must be determined by the manufacturer who makes the door. Generally, the drawer should be reserved for a certain distance. This distance is determined by the position of the door, so that it will not be played. Do not open the door, or do not open the drawer.
Secondly, the side panels on both sides should have enough fixing plates to support it to avoid deformation of the side panels. For example, a small cabinet for socks and sundries can be designed on one side of the side panel instead of the inner side, so that the side panel can be reinforced.
Finally, the span of each cabinet should not be greater than 1 meter, which means that the distance of 80 to 90 cm is most suitable, otherwise the long board is easy to bend and deform.
We are a professional Taiwanese-founded screw manufactory.
Our Taiwanese management system has controlled strictly for quality and delivery.
Our nicely service for all customers can let them worry about nothing.
We have not only stable quality, but competitive prices, because we are the real manufactory!
Our factory was established in October 2010 in Shenzhen China.
We are specialized in designing and producing screws, nuts, washers, pins and etc. for eyeglasses and watch.
We also have trading items for all repairing parts of Eyewear, for example, Nose Pads, grommets, temple, tip, etc.
We develop different new plastic products for customers, for example, the Blue Delux Kit, Nylon Wire Kit, Vials Stands, etc.
We think more for our customers, and we do respect all of our customers, and keep 100% confidential for all of information of them.
We are proud to be the strong support of customers!
We'll be the best supplier of our customers!
We'll be the best business friends of customers!
We'll keep do the best for customers!
Repairing Glasses of Taps, Taps Eyewear Repair, Small Taps for Glasses, Tap for Sunglasses Repair
TSM CO., LTD. , http://www.tsmscrew.com