Residual chlorine detector use method and operation
Instructions:
1. Turn on the machine and warm up the machine for 2 minutes.
2. Pour the liquid to be tested into the cuvette 1 and the volume to two-thirds of the volume. The filling process requires that the water stains not reach the outside of the cuvette. Place this cuvette 1 in the measuring cell; press the calibration key to make the instrument display 0.00 mg/L.
3. Take 100ML of the solution to be tested, add 15ML of buffer reagent, add 5ML of DPD reagent, press the confirmation key; at this time, the screen of the instrument shows decreasing from 60 to 0, and finally to 0; at this time, the ratio of the liquid to be tested added to the reagent is poured. The color dish 2; the cuvette 2 is placed in the measuring cell, and the display degree is the residual chlorine content.
3. Press the store button and the extract button to store and extract 20 experimental records.
Precautions for use
1. Chloride ion is not a measure of residual chlorine. The residual chlorine measurement contains measurements of free chlorine and combined chlorine content.
2. Determination of free chlorine must be carried out by adding a DPD reagent at a pH of 6.2---6.5 to form a red compound. If the pH is out of range, adjust with a buffer reagent or dilute acid or dilute base.
3. Principle of Total Chlorine Determination: In the case of pH 6.2---6.5, an excessive amount of potassium iodide is added, and DPD is directly added to react to form a red compound. If the pH is out of range, adjust with a buffer reagent or dilute acid or dilute base.
4. For turbid samples must be filtered before they can be measured.
5. Measurements cannot be made for samples with color.
6. The cuvette should be cleaned after each use and stored dry.
appendix
Preparation of pH buffer reagent: weigh 24g anhydrous sodium hydrogen phosphate or 60.5g disodium hydrogen phosphate pentahydrate, and 46g potassium dihydrogen phosphate, dissolved in water, add 100mL concentration of 8g / L disodium EDTA dihydrate Solution or 0.8 g EDTA disodium solids, transfer to a 1000 mL volumetric flask, add water indicator line.
Product see link
Dish Rack,dish drying rack,kitchen dish rack,dish drainer rack,dish rack sink,etc. The materials used are 304 stainless steel, easy to clean, never rust!
China Kichen Rack,Sink Grid,Stainless Mesh Storage Baskets,Kitchen Wire Storage, we offered that you can trust. Welcome to do business with us.
Kichen Rack is made of high quality 304 stainless steel, This kind of material steel luxury, never rust, resist corruption, easily clean, safe, healthy and durable. Prevent rust or chemicals from contaminating food and damaging health
kitchen dish rack,dish drainer rack,dish rack sink,Kitchen drying rack,Stainless steel drying rack
Shenzhen Lanejoy Technology Co.,LTD , https://www.szsmallcompressionspring.com