[Network] in the form of Chinese wardrobe closet may have there are many closet decor along with home style is different, but still the same plate making wardrobe. Today, China Wardrobe Network brings a variety of different wardrobe board advantages and disadvantages analysis, let's take a look.
Wardrobe sheet - fir integrated board
The fir board is also called the finger joint board. It is a small piece and a small piece of splicing. All the joints are glued. Secondly, the board has soft wood, insufficient strength and easy deformation and cracking. Thirdly, Its surface is not flat, it is easy to draw clothes, and the solution to the tick is to polish the paint, which will cause a high cost, two smells, no environmental protection, three paints are easy to change color, crack, fall off. Fourth, it is easy to be worms and difficult to care for.
Advantages: affordable, environmentally friendly without varnishing, with the fragrance of fir itself.
Disadvantages: the surface is rough and easy to hook clothes; because it is easy to deform and crack, it can only be fixed with the wall during processing, and can't move; the pile surface has many piles and small holes, which is not beautiful; it must be processed through multiple holes (fill holes, It can be put into use after grinding, waxing or painting) and after odor.
Wardrobe sheet - pure solid wood, imitation wood, solid wood veneer
The base material used for solid wood furniture is natural wood, and the real pattern of wood can be seen on the surface. Pure solid wood furniture means that all the materials of the furniture are solid wood, including the table top, the door panel of the wardrobe, the side panels, etc. are all made of pure solid wood, and no other type of artificial board is used. Pure solid wood furniture has high requirements on craftsmanship and materials. Solid wood selection, drying, finger jointing, seaming and other requirements are very strict. If any process is not tight, small cracking and loose joints will occur. The entire set of furniture was so deformed that it could not be used. Imitation wood furniture, from the appearance of solid wood furniture, the natural texture, feel and color of wood are exactly the same as solid wood furniture, but in fact, the furniture mixed with solid wood and wood-based panels, that is, the side panels, bottom, shelf and other components Thin wood veneered particleboard or MDF fiberboard, doors and drawers are made of solid wood. This process saves wood and reduces costs. So it is more acceptable in terms of price. Furniture manufacturers sometimes paint varnish or matt lacquer for solid wood furniture to express the natural color of wood. Solid wood veneer generally refers to the veneer of solid wood, the surface of the solid wood, inside is the MDF. The performance is stable compared with pure solid wood, not easy to crack, but not as good as pure solid wood.
Advantages: style, noble, original temperament to cater to people's return to nature.
Disadvantages: the price is high, and it is difficult to take care of; because of the painting process, it is easy to change color, which is why the color of solid wood furniture will be used more and more. The fatal flaw of solid wood furniture, the most important is the change of water content makes it easy to deform, especially need to be careful, such as not allowing sunlight, not too cold or hot, too dry and humid environment is not suitable for solid wood furniture of. If you do not pay attention to the use, frequent switching of the air conditioner causes excessive changes in temperature and humidity, even if the qualified solid wood furniture products sometimes deform and crack.
Shaoxing Haotuo Machinery CO., LTD. , https://hotochainsaw.com