[ Chinese wardrobe network ] preparation stage
Material presence
More formal furniture manufacturers, cardboard packaging is generally shipped to the site. After unpacking, check the plates and hardware.
Fixing screw
The nails are generally left on the plates according to the design drawings, and the workers at the site use special tools to fix the screws.
Cutting side panel
Since the closet is placed against the wall, the side panel is sawn off at the position of the baseboard. After you have it, look it up and see if it fits.
Installation phase
Place the bottom plate
The floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be very troublesome to clean up after installation.
Fixed frame
Install the side and back panels of the closet according to the grooves on the board and adjust the position between the boards.
Mounting roof
It is best to prepare a climbing stool on the scene. The top plate should be lifted up and then fixed with rivets.
Mounting shelf
Place the shelf where you have previously screwed it and then secure it. Pay attention to the fixed position of the shelf and the back and side panels.
Fixed door rail
The door rails are installed on the top and bottom sides of the wardrobe. The material of the door rails is better, lighter and firmer.
Installing the clothes rail
Fix the rivets in the reserved position and install the clothes rail. Note that the two sides should be balanced.
Finishing stage
Installing the door leaf
The two sliding doors should be attached to the position of the guide rails. Fix the door leaf first and then fix the guide rails at the bottom side to avoid the phenomenon that the door leaf falls off in the future.
Adjustment and improvement
After all the installations are completed, make a "full inspection" of the wardrobe. If there is any deviation, adjust it in time.
Complete acceptance
Finally, check the wardrobe: Shake the cabinet to see if it is firm and the details are in place.
Electric pressing combs with ceramic technology, the high heat retention provides for even heat conditions hair making it shinier, silkier and frizz-free.
This hot comb hair straightener heat-up just in 30 seconds with PTC comb, easily adjust the temperature to suit your hair type and quickly providing you with a salon-quality.
This compact and simple straight brush comes with a 360-degree rotating power cord which helps you operate with all your convenience.
Hair straightener comb will shut off automatically after 60 minutes of non-use ensures safety of home. Dual voltage from 110v to 220v perfect for your next world-wide traveling.
This compact and simple straight brush combs which helps you operate with all your convenience. The hot comb good for natural black hair, wigs & beard. Plastic case help us safe and avoid burns.
Please read the product description before use.Keep away from children. Turn off the power and unplug the power cord when not in use. If you have any question, please contact us.
Hair Straightener,Steam Flat Iron,Ceramic Hair Straightener,Electric Hot Comb
Xuchang Le Yi De Import And Export Trade Co., Ltd. , https://www.lileaderbeauty.com