Identifying forks to piece together furniture

There is an essential difference between “forking and living” and “hands-on”. "Hands-on" is based on the principle of repairing the old as the old. The specific repair process is: the furniture is dirty, the small parts are patched up, the joints are broken, the seams are closed, and the original style of the furniture is never changed. For the ancient furniture of one hundred and two hundred years or more, it is quite normal. However, the "fork gang" is different, especially the sloppy and old-fashioned piece of old furniture with deceptive nature, and it is even more inappropriate to change the standard of ancient furniture to be nondescript. The commonly used methods are: to change small, to change short, to change short. Such "improved" furniture does not actually have collection value. The following furniture fans introduce several simple methods for identifying "fork" furniture, which are for readers' reference only.

Ancient furniture.jpg

First, look at the standard. First compare the furniture with the old furniture map, grasp the difference between the north and south and the wide-style furniture, and prevent the mixed process of Su, Guang and Bei

Second, look at the length of the roasting pot, the height of the Luopan 是否 is consistent. Look at the bottom of the furniture four feet wear scars, the same is the same. Whether the bad cracks are in line with the wood texture. If the furniture is windy and loose, and it is inconsistent with the texture of the wood, it is a honeycomb, which is obviously artificial.

Third, peeling white. Whether the white parts of the furniture are gradual, if the boundaries are obvious, be cautious. Due to the hot collection of ancient furniture, the expensive appreciation space, the ancient furniture is relatively well preserved, and the whitening situation is extremely rare.

Fourth, see through the belt, look at the ash. Wear the belt and the face is intact, be careful when choosing. If it is a repaired rim, the ash is obviously torn open. The belt should be filled with hemp and smear. Hand touches the ash without fading, just slag

Fifth, look at you . Look at whether the steamed bread is consistent, whether the steamed bread is emerging, if it does not come out, the purchase should be cautious

Sixth, look at the three shoulders of the furniture is "hollow" serious. If it becomes a rabbit's lips, the inner shoulder will be seriously "lack of meat"

Seven, see if the decoration is consistent. For example, the location of the "beads", the pattern, etc. are consistent. Whether a piece of furniture ornamentation or line thickness is basically the same

Eight, look at the table, chair, a few sets of furniture, whether the style, the standard is consistent , whether the decoration is a pulse. Whether the ancient furniture has one or a set of decorative features and whether the corners are uniform. If the above situation does not match, it cannot be selected.

Nine, the color of the old furniture is black and dark, dull (pasting). Its textures, lines, furniture parts, low-lying and sunny colors are the same; instead of old furniture, the color of the front and back of the furniture will not be exactly the same due to the degree of oxidation. This is like snow falling on the man’s chin when it snows.

Ten, carefully look at the furniture and the back of the furniture , it seems that there are traces of modern machining. Such as the arc saw blade pulled by the circular saw blade, the indentation left by the electric plane, and the curved trace of the electric drill with the electric drill

Eleven, look at the color. The color of the furniture is black and the color of each part of the ornament is consistent. The choice should be cautious.

Twelve, look at the texture of the furniture , the size and direction of the broken seam is very important. The texture direction determines the size of the quilting. In the case of a straight texture, the seams are large; the texture has an arc, but the seams are closely aligned. Be careful when choosing.

Thirteen, look at the material. Look carefully at all the structures for new traces. From the edge of the texture section, the surface of the rag is textured, curved, especially the structure is curved, and the structure is very tight or the quilting of the structure is opposite to the texture, so pay more attention to the selection.

Fourteen, look at the panel . Due to the climate change in recent years, coupled with the changes in people's living conditions and heating methods, the facial panels of ancient furniture have been further contracted. The shrinkage joint of the ancient furniture face board is more normal. If the gap is not small or small, it is not a big change of furniture, that is, "fork to help", the purchase should be cautious.

Facial Tissue Paper

Facial Tissue,Facial Tissue Paper,Facial Tissue Bulk,Thick Tissue Paper

DONGGUAN YEE HUP TRADING CO,.LTD , https://www.yeehupack.com

Posted on