[ Chinese wardrobe net ] The main features of the overall wardrobe are: standardized modules, tailor-made. The overall wardrobe can be divided into four types according to different styles: integral, in-wall, support and walk-in. The design of the overall wardrobe is in harmony with the home decoration. In the warm living atmosphere, it brings a simple and fashionable charm, allowing you to live poetically and artistically. Therefore, the choice and design of the overall wardrobe style is essential:
A. Classified coats, shirts, trousers, T-shirts, underwear, vests... Our clothes have an increasingly complex trend.
When storing this pile of things, there are also various placement requirements such as folding flat and vertical hanging. As a result, the overall wardrobe came into being. The whole wardrobe can be divided into hanging area, stacking area, underwear area, clothing area, shoes and socks area and bedding area. Each area can even be divided according to its own needs. In the cabinet, drawers, pants racks, pull baskets, rotating hangers, push-pull mirrors, etc. can be added; drawers can be divided into many small lattices, such as tie, brooch, silk scarf, necklace, etc., all clothes and accessories are clear at a glance, not only Easy to pick and place, and the wardrobe is always neat.
According to the demographic composition of the family, the space of the wardrobe is reasonably designed.
1. Older people have more clothes stacked and fewer pendants, and most of them may not be worn for a long time. Therefore, you can consider more independent laminates and drawers when designing, and store less clothes separately. Considering that the elderly are inconvenient to move, the drawer should not be designed at the lowest or lower position, and should be about 900mm above the ground, so that the elderly can easily take the clothes;
2, husband and wife's clothing, it is diverse, there are professional dress, casual wear and sportswear and so on. Generally, the left and right sides are respectively set as the storage space of the husband and wife, if the room area is large enough. The clothes in the cabinet are divided into two layers, which are windbreakers, dresses or tops. Shirts, tops, etc. can be hung in short layers or can be placed in separate small drawers or laminates, but not too much. Will wrinkle the clothes. Underwear, ties and socks can be used with special fashion drawers, luxurious tie clips and pants racks, which are beneficial to the maintenance of clothes and more intuitive and convenient; seasonal and strong clothes such as sweaters can be placed in the top cabinet;
3, children's clothing, on the one hand taking into account the placement of children's toys, it is best to design some drawers, laminates or lattices in the design of the wardrobe, on the other hand, taking into account that children's clothing will grow with age Frequent replacement, so it is necessary to design some places such as clothes and other pendants, and the color of the wardrobe of the children's room is also very particular, should be based on warm colors.
B, attention to detail
1. Accessories: The design of the accessories must first consider the available space inside the wardrobe, avoiding the lack of space in the wardrobe, and designing too many accessories. On the one hand, the internal space of the wardrobe will be wasted, and the storage effect will not be achieved. It may cause some accessories (such as connectors, screws) to not work properly;
2, color: the choice of the color of the wardrobe must be consistent with the overall decoration of the home. If the home is dominated by warm colors, the color of the wardrobe can not choose the appearance of the cool color, the wardrobe should be a beautiful landscape at home, it is recommended Choose a natural-looking color look to match your home style.
C, standard design
1. Generally speaking, each storage space of the wardrobe is exquisite. The height of the hanging short coat or tops is not less than 800mm; the height of the long coat is not less than 1400mm; the height of the drawer is not less than 150mm~200mm; as for the cabinet with stacked clothes, the width of the folded clothes, The width of the cabinet is between 330mm and 400mm and the height is not less than 350mm. The top of the whole wardrobe is designed with the top cabinet, and the unused items such as quilts are placed, and the height is not less than 400mm.
2. Due to the different structure of each type of house, pillars and beams may appear on the wall of the installation cabinet. When designing, the limited space should be utilized as much as possible to maximize the use of the storage space of the cabinet without leaving a sanitary corner.
3. In addition, according to the rationalized design standard, the height of the cabinet is usually 2400mm or 2300mm, and the height of the standard commercial room is 2.8m, so the wardrobe will be divided into two layers. The upper layer is placed on the quilt and other unusable items are the top cabinet. Below, there is space for clothing that is often used.
D, reasonable partition
1. Although each family's clothing is old and young, large and small, but if the space design is reasonable, it is convenient to find clothes and save time. There won't be a situation where you have to find a piece of clothing to rummage through the closet, or if a piece of your favorite clothes is lying in a corner for a long time.
2. In areas where seasonal rotation is not very obvious, there are not many clothes to be replaced every season. It is recommended that the wardrobe be divided according to the frequency of clothing replacement. Put some clothes or bedding that are not frequently changed in the quarter at the top of the closet, and put some clothes that need to be changed frequently in the lower part. Most of the clothes are hanging, so that after drying and ironing, you can hang directly in the easy-to-take place. It is very convenient when you need it next time.
E, wardrobe standard design
1. The side panels and laminates of the closet need to be loaded with 18mm thick melamine pressure medium density fiberboard. The cabinet board must have the national authoritative test report, in line with the national mandatory standard GB18584-2001 standard, formaldehyde release The quantity is ≤1.5mg/L, the water content is between 5-11; if the back plate does not need weight bearing, it can be made by 5mm thick, which can save cost. If the condition allows, the thickness of the door and back plate should be 9mm. For the wall cabinet, the back plate needs to use 18mm thickness and the density standard is 0.6-0.9g/cm3 to enhance the firmness of the wall cabinet;
2, although the overall wardrobe is tailor-made products, but there are also standard and non-standard points, the standard parts are calculated according to the specifications of the plate, the manufacturer can maximize the use of the plate, the sealing is generally uniform, can not see Black lines and sawtooth marks; non-standard parts will waste a lot of plates, so the price, non-standard price will be more expensive;
3, the metal frame of the closet door, the door frame has two kinds of carbon steel and aluminum. Carbon steel is easy to rust, and currently it is dominated by aluminum. Aluminum materials include aluminum-magnesium alloys, aluminum-titanium alloys, and the like. Titanium has high strength, small specific gravity and high price. In fact, even aluminum-titanium alloys have the problem of high titanium content. In general, with the fingers, the aluminum-titanium alloy sounds crisp and the metal feels stronger. The minimum metal wall thickness is required to reach 1.1mm.
4. The wardrobe door panel is made of glass, plate and other materials. The thickness of the glass is 5mm. The texture of the wardrobe door is frosted glass, clear glass, cloth glass and embossed glass.
5. The material of the sliding door track is: aluminum alloy, galvanized steel. The styles are: insert ceiling, side suspended ceiling, single rail, double rail. Door rails should be equipped with anti-collision dustproof devices and positioning systems. Prevent heavy objects and sharp objects from hitting the track, keeping the track straight and smooth.
6, top wheel and bottom wheel, ordinary door wheel shell is electroplated, easy to rust, the wheel is made of ordinary engineering plastics, easy to wear? High-grade door wheel is stainless steel shell, high-precision bearing, smooth, no swing, pulley Special anti-jump device. The wheels are made of carbon fiberglass and can be pushed and pulled more than 100,000 times under a load of 180 kg. Some use ordinary plastic (may be engineering plastic or nylon) door wheel, oil on the door wheel to reduce the sound, cover up the defect, but in the future, it will stick a lot of dust, leaving behind trouble.
15Ml Glass Perfume Bottles,Blue Glass Perfume Bottle,Small Glass Perfume Bottles,Empty Glass Perfume Bottles
Zhejiang Changxing Hanghua Glass Co., Ltd. , https://www.hanghua-glass.com