[ Chinese wardrobe net ] Then the beautiful clothes also need to have the artifact to store it. The wardrobe is of course the first choice for hanging clothes. You can know the selection of the wardrobe. The most important thing is the material of the door panel and how to choose the door panel. Let us specify Take a look.
The first step: the door frame material and the thickness of the door panel are particular
At present, the frame materials used in the wardrobe doors on the market mainly include carbon steel materials and aluminum-titanium alloy materials, among which aluminum-titanium alloy materials are the most durable and durable; the thickness of the wardrobe door panel is another point of attention, and the wooden board for sliding doors is the best choice. 10mm or 12mm thick plate, so stable and durable to use; thickness less than 8mm, it will appear thin and light; door panel thicker than 6mm is very easy to deform, it is difficult to meet the requirements of normal use.
If the frame material of the cabinet door is too thin, the quality is not closed, or because the sheet expands and contracts, the gravity of the glass hangs down, and after repeated push-pull, the cabinet door itself will also be deformed. The quality of the aluminum-titanium package should be relatively reliable. The same fiberglass pulley is also a guarantee for long-term use.
The second step: the key to bearing, the small pulley can not be underestimated
The pulley is the smallest but most important hardware component of the sliding door. There are three kinds of pulleys on the market: plastic pulleys, metal pulleys and fiberglass pulleys. The plastic pulley is hard, but it is easy to be broken. It will become awkward and hard when used for a long time, and the push-pull feeling becomes very poor. The metal pulley is strong, but it is easy to generate noise when it comes into contact with the rail. The fiberglass pulley has the toughness, wear resistance, smooth sliding and durability, and is the best pulley material available today.
The third step: the track is good or bad is critical. The quality of the track depends on the fact that it must have a curvature that can be matched with the pulley. It should be reminded that the good track is excellent in the strength design and the smoothness of the contact surface with the pulley, not the thicker the track wall, the better. At present, the track of the sliding door has two types of cold rolled steel track and aluminum alloy track. Rails are not always good. It should be said that good aluminum rails are superior to rails in some respects, especially in terms of noise immunity.
In addition, it is necessary to pay attention to whether the product has a stop block and an upper and lower rail positioning system, whether there is a glass anti-collision strip, whether the bearing type pulley is smooth and silent when pushed, whether a shock absorption system is placed in the bottom wheel, whether there is a door height adjusting device, etc. .
The fourth step: the sealing property determines the environment inside the wardrobe. In order to ensure that the two doors are staggered and closed, all the sliding door products will have a gap. The general external pulley needs a spacing of 15 mm. This interval affects the sealing of the sliding door, especially In places with large wind and sand, there are many opportunities for dust intrusion, and it is easy to accumulate dust inside the wardrobe.
Although most products have tops, the gap between the tops used in different products and the gap size is still relatively large. Try to choose products with small spacing and tight tops. For example, the product has a door spacing of only 5 mm, and the high-density tops basically prevent the intrusion of dust and keep the wardrobe and clothes clean.
The fifth step: the critical point of life is on the pulley
The key factor affecting the service life of the sliding door is the pulley. The design of the big brand's pulleys is about 15 years, and the pulleys of some counterfeit products may break down in 2-3 months, which seriously affects the use of sliding doors. The pulley of the closet door consists of two parts, one is the top wheel and the other is the bottom wheel. There are two ways to install the bottom wheel, one is implicit and the other is external. The hidden bottom wheel means that the bottom wheel is installed under the door. After the rail is placed, you can't see the wheel from the front and the back of the door.
The material selection of the pulleys mentioned above, the pulleys of fiberglass materials are the most wearable on the market today. The pulley slides are complicated, the pulleys are smooth, pressure-resistant, wear-resistant, safe and reliable. Consumers should pay attention to the most. Households generally require more than 60,000 times of pushing and pulling.
Towel Bars
The strongest and most powerful feature of Yufa's bathroom accessories is our consistent high quality. From design to manufacture, each product is essence of creation. Towel bars, Towel Rings , Tumbler Holders,Soap Holders, Wire Baskets, Tissue Holders and other exquisite accessories for your selection.
Towel Bars,Pipe Towel Bar,Double Towel Bar,Brass Towel Rack
Kaiping Yufa Sanitary Ware Co.,ltd , https://www.yufa-bathroom.com