[ Chinese wardrobe net ] Today's wardrobe market, custom-made wardrobes continue to heat up, and are loved by consumers. However, people often have doubts about how to choose a wardrobe. Here, Xiao Bian deliberately starts from the three aspects of the panel, edge banding and veneer of the wardrobe, and teaches you how to identify the advantages and disadvantages of the wardrobe. There are skills in the whole wardrobe purchase. Today, Xiaobian teaches you how to find out the inferior wardrobe. Look carefully...
Whether the board is environmentally friendly: the formaldehyde content of the board is the primary factor to consider when purchasing a wardrobe.
The formaldehyde content of the board is the primary factor to consider when purchasing a wardrobe, as this is closely related to our health. When you purchase, you can close the door and wait for about 5 minutes, then open the door and smell it with your nose. There is an odor indicating that the formaldehyde content may exceed the standard and is a poor quality product.
The general professional brand wardrobe formaldehyde will not exceed the standard, like the Apple aristocratic wardrobe, all the products of the Apple aristocratic wardrobe are adhered to the original plate of the European standard E1, with environmental protection, moisture resistance, hardness, sound insulation, heat insulation, and good load bearing. It is resistant to pollution, anti-aging and beautiful.
Whether the edge banding is strict: the apple noble wardrobe uses a precision panel saw to cut the board, and there is no chipping around the board.
Some manufacturers have no professional equipment, and the production of the wardrobe products is rough, and there are obvious edge collapses around them. Some even cut corners and cut only the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life.
Professional brand manufacturers, such as the apple aristocratic wardrobe, use precision panel saws to cut the board, and there is no chipping around the board. After sealing around, it can effectively prevent the moisture in the air from intruding into the interior of the board. It also adopts exquisite same-color edge-sealing technology to make the visual effect of the plate seamless, and the fine edge-sealing process does not fall off for a long time.
Whether the veneer is wear-resistant: professional brand manufacturers have high surface strength, wear and scratch resistance
Professional brand manufacturers use environmentally-friendly melamine veneers with thick thickness and high temperature and high pressure treatment, with high surface strength, stable characteristics, abrasion resistance and scratch resistance.
The inferior wardrobe produced by the bad merchants uses the low-cost panel on the market, and the surface is covered with Pauli paper and gorgeous paperboard. It looks good. In fact, the wear resistance is poor, and it can be drawn with a light stroke. Obvious scratches.
In short, a quality wardrobe is solid and reliable in terms of materials and workmanship. Apple aristocratic wardrobes suggest that you should pay attention to careful identification when purchasing.
Single-Zipper Wallet,Zip Up Wallet,Coin Purse With Zipper,Women'S Zip Wallet
GUANGZHOU KOEDS LEATHER LIMITED , https://www.kodes-bag.com