The era of synthetic paper is coming soon

The United States has now become a major country in the use of synthetic paper, and its usage has risen sharply, especially in commercial printing.

The use of brush has reached 30,000 tons.

Synthetic paper is produced in the same way as plain paper. Inside an extension device, the plastic

Extrude to the mobile line, the difference is that synthetic paper does not need water. The main ingredient of synthetic paper is polypropylene

Or polyethylene, because the surface has a layer of clay and adhesive coating, so than ordinary

Paper is several times more expensive. In order to ensure profits, there must be no slightest mistake in production.

The inks that can be used with synthetic paper are almost all oxidative crosslinked inks. Manufacturers generally push

It is recommended to use an ink with a viscosity of 16 or more. The drying time of synthetic paper after printing will depend on the coating of the product surface

Layer, fabric texture, ink coverage and other factors vary. Although the prints are in 1~2

It will dry within hours, but it will work better if it is put in one night. Synthetic paper for inkjet

When printing, the printer should consult the manufacturer where the product needs special attention. For example, light and resistance

Heat resistance, alkali resistance, alcohol resistance, detergent resistance, etc. Synthetic paper can basically be used for food package

Packing, but if used for the packaging of fruit and vegetable drinks, it should be investigated beforehand if acidity will occur.

should.

Synthetic paper for laser printing is a topic of the future because dry toner needs to be fused

The high temperatures can cause the synthetic paper to shrink, or roll up and change the size of the paper. worst

It is a bonded structure that will disintegrate the paper. Now the new copiers and printers can be equipped with tune

If you have a temperature-controlled fuser roller, then these problems can be easily solved.

Another problem with synthetic paper is that it is electrostatically charged;

Static electricity. Therefore, even after printing, the static electricity accumulating on the substrate tends to

Problems. Therefore, a layer of clay-containing coating is applied on the surface of the synthetic paper for printing purposes.

Folding, cutting, etc. are not necessary for post-processing of double sheets. Synthetic paper in environmental requirements

Use it more often. However, due to fluorescent whitening in the additives added to the coating layer

Agents, etc., are prone to cracks under direct sunlight, so almost all synthetic paper used outdoors is

Milky white or gray.