How to install the carousel yourself and pay attention to skills:
The carousel is a very popular amusement device in many amusement parks. It has a high safety factor and moderate activity. Adults and children love to play. However, for many operators, because they have not been in touch with the industry before and do not know how to install them, they will be able to save time and effort. Here are some tips that you must pay attention to when installing a carousel for your reference.
First, install the center base and rails first.
Remind you that this step is the most important. Before installation, you need to have a certain understanding of the site and then ready to start the installation. For users with large site limitations, you must find the center point, so as to be in a limited space. Installed.
The technique for finding the center point is very simple. You need to prepare a tape measure and a few meters of rope in advance. Determine the size of the overall diameter of the amusement device you are going to install. Then use a tape measure to mark a radius. For example: A 12-seater trotting horse, with an overall diameter of 5 meters, marks the length of a 2.5 meter rope. Then one person stands near the center of the site's hypothesis and fixes one end of the rope, while the other person picks up the other end of the rope and pulls a circle. When it is beyond the scope of the venue, it then finds another hypothetical center point. This center point is valid when the venue is in range. Place the center base in this position after marking. This simple method of measuring diameter is very effective.
After doing this, the next step is to fix the track rails and install the rails. At this point, the base and track sections have been installed.
Second, install the disk.
When installing the disk, there is also a technique that does not require full installation when installing the disk. You are reminded that, first of all, you need to install rectangle-shaped discs with labels according to the labels. After fixing them with screws, you can push the discs to observe whether the tires run on the rails with improper walking, and then install the motor drive belt or chain. At this time, you can turn on the power and try to start the operation. If there is a fault, you can quickly find the fault point and solve the problem. You do not need to remove the fan disk, saving time and increasing the installation efficiency.
Third, the installation of the column, the top, cornices, lighting decoration.
It has been learned that what should be noted here is that if it is a deluxe turntable, if there is a durable board or photo decoration on the top part, it should be fixed on each lower top frame before installation, because after all the frames are installed, the decoration will be installed. It will be very difficult. The upper part of the electrical equipment only light, can be connected to each lamp string together and then connected to the corresponding voltage of the conductive ring or transformer. In addition, after installation, be sure to carefully check the correct connection of the circuit, to avoid equipment failure due to short-circuit causes.
Drawer Slide Rail,Table Slide,Ball Bearing Slide
Door Handle&Door Lock Co., Ltd. , http://www.gdhandles.com