In the process of hard disk data recovery, it's not uncommon to encounter situations where, after setting an ATA password, scanning with MHDD software results in a full row of exclamation marks (except in cases of physical damage). However, within the MHDD interface, you can often see the word "PWD" displayed, indicating that a password is active. This behavior is consistent across various hard disk brands, but when dealing with Hitachi drives, there are unique challenges that require special attention.
During the data recovery process for Hitachi hard disks, if the drive is completely unresponsive or shows signs of severe failure, one of the first things to consider is whether encryption has been enabled. The encryption mechanism on Hitachi drives is different from that of other manufacturers. When a password is set, it doesn't just lock the drive; it also protects the working firmware areas—typically referred to as A area and B area. These sections are secured by the encryption, making them inaccessible for standard decryption methods. Additionally, the NVRAM (Non-Volatile Random Access Memory) cannot be modified directly, although the encryption itself does not alter the data stored in it.
The decryption process for Hitachi hard disks requires a specific approach. Since the drive is connected to its own controller board, the encryption primarily restricts the firmware areas (A and B), while the C area remains unaffected. This allows for a workaround: the NVRAM data can be accessed and edited through the C area. By using the cryptographic module located in the C area, it’s possible to write back the necessary encryption keys to the A area. If the C-area cryptographic module is damaged, it may be possible to retrieve a similar module from a compatible drive of the same series and use it to restore functionality.
This method has proven to be highly effective and versatile in many real-world recovery scenarios. It highlights the importance of understanding the internal architecture of different hard drive manufacturers, especially when dealing with encrypted devices.
Common password-related modules used in Hitachi drives include ICES (typically found in 2.5-inch drives), SECI (used for 3.5-inch models), and PSWD (older 2.5-inch drives). Familiarity with these components is essential for successful data recovery in encrypted Hitachi drives.
Sensor Trash Bin With Ozone Sanitizing
Sensor Trash Bin with ozone sanitizing is multifuctional. Multifunctional sensor trash can is not only with sensor function to help you much more effortless to trash and equipped with an ozone generator on the lid to release the ozone to do sanitize inside the bucket. The rubbish bin with ozone sanitizer could be open the lid automatically by waving your hands in its sensor area 15-25cm or kicking the bin body. The sanitizable garbage bin for home is designed with two buttons on the sensor screen. One is for lid stay open --press "open" the lid will open and it won't close until you press "close". The other is ozone switch--press the button, then the ozone generator will start release ozone to do sanitize inside the bucket.
Multifunctional Sensor Trash Can, Rubbish Bin with ozone sanitizer, Sanitizable Garbage Bin for Home, Smart Compost Bin with Ozone Sanitizing
ZHEJIANG ERHUI TECHNOLOGY CO.,LTD , https://www.jahhome.com