Matters needing attention when using temperature test equipment:
1. When conducting a large sample test, there will be temperature and humidity deviations in the ascending and descending airflows, so you should carefully consider where to place the samples. Try to place it in the center of the working space of the test equipment. The samples must not be in contact with each other and overlap, and a certain interval should be left to allow air circulation; and Shanghai Boxin Instruments should also ensure that the samples are easy to move during the test and easy to test. Replace the sample.
2. Check for volatile substances such as oil and gas in the test area, and check for odorless substances. The test results of such substances must be confirmed in advance.
3. Pay attention to confirm the temperature condition of the test sample in the test area.
4. In order to keep the temperature in the temperature zone consistent, it is necessary to ensure the test environment temperature as much as possible. The power fluctuation of Shanghai Baixin instruments and equipment is minimal, to ensure that the test sample does not generate heat radiation and absorb heat to ensure the temperature of the test zone is stable.
5. After the temperature test equipment finishes the test, quickly removing the test sample will cause unnecessary stress to the sample and may obtain unexpected results. Therefore, the sample must be removed after the test sample has cooled to ambient temperature.
6. The thermal conductivity of the installation of the test sample and the support frame should be low to ensure that the test sample and the installation and support frame are in an insulated state.
Led Reef Light,Reef Led Light,Led Aquarium Light,Aquarium Light Led
HENGYUE INDUSTRIAL CO.,LTD , https://www.hetoaquarium.com