Installation Precautions
1. The whole machine should be placed in a place with small temperature difference and convenient operation. Avoid direct sunlight and away from heating equipment, and place it stably.
2. Place the gas cylinder and nitrogen bottle in a stable position, and install the pressure reducing valve (including pressure gauge) separately. Placed in place.
3. Connect the gas path and check the gas path. To prevent air leakage, if necessary, seal with a sealant at each joint.
Anaerobic incubators are divided into four parts: anaerobic chamber, transmission chamber, bare hand sleeve operating hole, gas path and circuit control system.
1. Anaerobic chamber: The mechanical forced convection and positive pressure of the inner cavity are realized, and the state of constant temperature, humidity control, oxygen removal and biological detoxification is stable and uniform, and the recovery is rapid, and the operation is carried out in the same room.
2, transmission cabin: the use of compact tubular design, easy to transfer samples with one hand and one hand.
3, bare hand cuff operation hole: no need to carry out vacuum / nitrogen replacement process, hands can go straight into the lumen anaerobic.
4, control system: comprehensive real-time status self-test alarm function to ensure the normal operation of the equipment. Scope of application
Design: 1, small size, very suitable for crowded microbiology laboratory. 2, easy to operate, operating hands in and out and sample transfer without vacuuming and nitrogen filling operation, internal cavity temperature, humidity, anaerobic state, biological waste gas treatment, etc. are fully automated. 3, bare hand operation, to avoid heavy full gloves caused by the operation of the discomfort. 4, the first ergonomic operation hole side angle design to reduce occupational damage caused by long-term operation. 5, the standard components are complete, basically realize the "zero" plus purchase worry after the user standard procurement.
This product is a special device for bacterial culture and operation in an oxygen-free environment. It can cultivate the most difficult anaerobic organisms and avoid the risk of death from contact with oxygen when anaerobic organisms operate in the atmosphere. Therefore, this device is an ideal tool for anaerobic bioassay research. Structure and function: This type of product generally consists of constant temperature culture room, anaerobic operation room, sampling room, gas path and circuit control system, box frame, bottle holder, melt wax sterilizer and so on. Due to the inconvenient use of the structural design, the anaerobic workstation has revolutionized the structural design of the anaerobic workstation in response to the needs of the operator.
Professional manufacturing is more secure, affordable, our quality is the best, worthy of your trust, Shanghai Xinzhuang welcomes you!
Http://
- Sharp to cut or scrape away dead cuticle on one end
- Curved flat end perfectly pushes the skin back flawlessly
- Durable metal resists wear and tarnish; easy sterilization
-
- Professional remove dead skin
- Great for professional or home use
Cuticle Pusher,Cuticle Pusher Stainless Steel,Pusher Cuticle,Nail Cticle Pusher
Yangjiang Yangdong Kartier Beauty Tools Product Factory , https://www.kartierbeauty.com