Japan's Aoki Corporation is a high-tech company specializing in the production of injection blow blow molding machines. It uses different materials (PET, PP, PC, PEN, SAN, PA, PE, PES, etc.) produced by the company's equipment. ), Different bottle types, different specifications of various types of bottles to more than 5,000 kinds. The company introduced a one-step injection blow blow molding machine new models SBIII-250 LL-505 has the following characteristics:
1 The molding cycle is short. As all the clamping mechanisms are linked, the invalidation action is eliminated and the cycle time of the molding is shortened from the original 14 s to 9 s.
2 The rigidity of the machine is improved, stable thin-wall molding can be performed, and the product qualification rate approaches 100%.
3 The hot runner mold is used to shorten the time for changing the mold, reduce the investment cost of the mold, and is more suitable for multi-species and small batch production.
4 Highly productive small-scale models, with competitive production capacity.
5 energy saving. Use a direct temperature control method that no longer heats: After the molten resin enters the cavity, use the heat held by the parison to adjust the temperature distribution within the preform before it reaches the maximum value, making it suitable for preforms. Stretch blow molding to make the product. This molding technology has obtained more than 20 patents in Japan, the United States and Europe.
6 Low cost. The total cost of using a one-step injection stretch blow molding machine to produce bottles is about 1/3 of that of the two-step process. The cost reduction greatly improves the competitiveness of the product.
1 The molding cycle is short. As all the clamping mechanisms are linked, the invalidation action is eliminated and the cycle time of the molding is shortened from the original 14 s to 9 s.
2 The rigidity of the machine is improved, stable thin-wall molding can be performed, and the product qualification rate approaches 100%.
3 The hot runner mold is used to shorten the time for changing the mold, reduce the investment cost of the mold, and is more suitable for multi-species and small batch production.
4 Highly productive small-scale models, with competitive production capacity.
5 energy saving. Use a direct temperature control method that no longer heats: After the molten resin enters the cavity, use the heat held by the parison to adjust the temperature distribution within the preform before it reaches the maximum value, making it suitable for preforms. Stretch blow molding to make the product. This molding technology has obtained more than 20 patents in Japan, the United States and Europe.
6 Low cost. The total cost of using a one-step injection stretch blow molding machine to produce bottles is about 1/3 of that of the two-step process. The cost reduction greatly improves the competitiveness of the product.
Enamel Stock Pot Co., Ltd. , http://www.nskitchenwares.com