Thermoset ink classification and use

The types of thermosetting inks include common thermosetting inks, high elasticity thermosetting inks, thermosetting inks, transfer thermosetting inks, bright transparent, right-angle rounded dents, low-temperature thermosetting inks, foamed thermosetting inks, scratch-resistant Matte ink.

Thermoset inks are non-solvent inks, and all raw materials are free from harmful ingredients. With infrared thermosetting, environmental protection features. Intercalation printing can be overprinted by instant heat treatment, and long-term placement does not dry the board, so greatly improve printing efficiency and save ink. Generally, the heat treatment of finished products needs to meet the following requirements: temperature 160 degrees; time 1-2 minutes. Effective heat treatment needs to be applied flexibly depending on the substrate and the printing effect. Widely used in cotton, synthetic cotton, polyester, synthetic fiber and some nylon fabrics. If there are technical difficulties when printing on special fabrics, the factory provides technical support.

Ink color card use matters needing attention

Before using the product, you must read the instructions for use carefully. The specific application of the product must be determined according to the requirements of the substrate and the customer. Before entering the batch production, the color sample must be confirmed.

The color card is based on the Pantone Matching System and is modulated according to the characteristics of the screen printing. Specific reference color reference color matching principle, according to the specific printing process (substrate and effect requirements) to adjust the use.

Product System

Ordinary ink: is a general-purpose product, widely used. Generally use 90-200 mesh screen printing.

High Covering Ink: Mainly suitable for printing on dark and black substrates. Direct printing generally uses a 70-110 mesh screen, and white printing generally uses a 110-180 mesh screen.

Fluorescent ink: Translucent ink, weak hiding power. Printing on dark substrates needs to be done on a white background, generally using a 110-160 mesh screen.

Three primary color inks: dot printing inks, high transparency. Generally use 250-350 mesh screen printing. Commonly used printing sequence: yellow, red, blue, black. Eradication of the sample requires printing sequence and the ink color can be adjusted to apply. Dilution generally uses ordinary transparent dilution.

Special inks: Ink products developed according to special needs. For example: swimwear ink, thermal transfer ink, nylon ink, quick-drying ink. Save: Avoid sunlight, save at room temperature. Long-term storage needs to be sealed and kept.