Anti-drying agent (anti-drying agent)
Anti-drying agents are also called antioxidants or anti-oxidants. When the ink formulation adopts some pigments with strong driers (iron blue, chrome yellow, etc.), there is a phenomenon of conjunctiva during rolling, which makes it difficult for the ink to be finely rolled. During storage, oxidation occurs due to the contact of the ink surface with air and the skin is crusted. , and sometimes even dry out of use, the tendency of the crusts to dry on the printing press can also occur. These problems are considered as much as possible in the manufacture of ink, so inhibitory fillers such as AL (OH) can be properly added to the ink. ) 3 or reduce the dry material such as petrolatum, wax and so on. However, sometimes these methods cannot completely overcome these problems. In this case, appropriate anti-drying agents can be added to delay the oxidative polymerization of dry oils.
Antidrying agents can delay the oxidative polymerization of dry oil because these substances are all strong reducing agents.
6. Gelation, thickening, and clumping of the anti-gelatinizer ink system are generally caused by the following factors: As the basic pigment and the acid value are higher or the binder material containing free fatty acid is agglutinated; the ink system The pigment content is too high; the binder used is not appropriate; the miscibility of the resin and grease in the binder is poor. In the high molecular polymer system, since the pigment absorbs acidic substances, it also promotes gelation and the like.
Due to being too thick, or due to the high gelation of the binder, it can be overcome by the addition of appropriate dilute, soluble substances (fatty acids, ester ketones, etc.).
For the type of gelation that reacts into gum, rosin acid (rosin, or rosin acid dissolved in linseed oil), linseed fatty acid, maleic acid, or maleic anhydride resin with high acid value (soluble In linseed oil) high acid content is used to release the glue.
Seven, anti-(viscous) dirty agent Anti-dirty agent is also called anti-smearing agent, which means to prevent the printing ink from sticking to the back of another printing product. It also prevents piles of prints from sticking together.
The method of using the anti-dirty agent is mostly used in the printing industry. The spraying method is divided into two methods: powder spraying and liquid spraying.
The powders used in the dusting method are generally starch, precipitated calcium carbonate, calcite derived from the reaction of calcium nitrate and ammonium carbonate, fine-grained wax, silica, etc. The requirements for these molecules are generally approximately 15 - Between 30 microns, moisture absorption is small, neutral, no friction, can not affect the process, such as overprinting, covering and so on.
Spraying liquid method is to spray the so-called fast solidifying material. This kind of material consists of a solid that is a phase and the other phase is a liquid. After being printed on paper, it is selectively absorbed by the paper. The solvent part is immediately sticky. The components are related to each other and form an anti-fouling property together with the color.
Disadvantages of the strong antifouling agent are that it is easy to pollute the air and the machine, causing the operator to feel uncomfortable, and it is not suitable for some advanced glossy papers because it will destroy the gloss of these papers.
In recent years, although the ink industry has developed a number of fast-setting inks, the problem of blemishes on printed products has not yet been resolved in a relatively broad range. Therefore, the anti-fouling agent is still in use, and its research is still underway. The principle of anti-fouling agent developed this year is that it consists of immiscible materials. After printing, auxiliaries can float on the surface of the ink layer to form an irreversible “cushion†to reduce the offset of the printed product.
The following are the names and models of several domestic commonly used offset printing ink auxiliaries, which are for reference only.
Commonly used offset thickeners, grease type 101 external oil and 0 external oil, resin type 05-94 thick varnish and 901 thick oil.
Commonly used offset thinners, grease type 165-6 and No. 6 varnish, resin type 8021 resin varnish, 05-01 varnish, No. 6 resin varnish, 906 resin varnish , 40 light varnish and 42 light varnish. Solvent type with 8062 thinner, 57 thinner and 908 white kerosene.
Commonly used scatterers are 8043 scuffing agent, 05-92 detackifier, 653 detackifier, 903 detackifier, and 49 detackifier.
Commonly used anti-drying agents are 522 anti-drying agent, 70 anti-drying agent, 08 anti-drying oil, 70 anti-drying agent and 48 anti-drying agent. Usage is controlled at 0.3-1%.
At present, there are not many varieties of anti-crystallization agents, only 52 anti-colorants, the use of general control within 10%.
Anti-drying agents are also called antioxidants or anti-oxidants. When the ink formulation adopts some pigments with strong driers (iron blue, chrome yellow, etc.), there is a phenomenon of conjunctiva during rolling, which makes it difficult for the ink to be finely rolled. During storage, oxidation occurs due to the contact of the ink surface with air and the skin is crusted. , and sometimes even dry out of use, the tendency of the crusts to dry on the printing press can also occur. These problems are considered as much as possible in the manufacture of ink, so inhibitory fillers such as AL (OH) can be properly added to the ink. ) 3 or reduce the dry material such as petrolatum, wax and so on. However, sometimes these methods cannot completely overcome these problems. In this case, appropriate anti-drying agents can be added to delay the oxidative polymerization of dry oils.
Antidrying agents can delay the oxidative polymerization of dry oil because these substances are all strong reducing agents.
6. Gelation, thickening, and clumping of the anti-gelatinizer ink system are generally caused by the following factors: As the basic pigment and the acid value are higher or the binder material containing free fatty acid is agglutinated; the ink system The pigment content is too high; the binder used is not appropriate; the miscibility of the resin and grease in the binder is poor. In the high molecular polymer system, since the pigment absorbs acidic substances, it also promotes gelation and the like.
Due to being too thick, or due to the high gelation of the binder, it can be overcome by the addition of appropriate dilute, soluble substances (fatty acids, ester ketones, etc.).
For the type of gelation that reacts into gum, rosin acid (rosin, or rosin acid dissolved in linseed oil), linseed fatty acid, maleic acid, or maleic anhydride resin with high acid value (soluble In linseed oil) high acid content is used to release the glue.
Seven, anti-(viscous) dirty agent Anti-dirty agent is also called anti-smearing agent, which means to prevent the printing ink from sticking to the back of another printing product. It also prevents piles of prints from sticking together.
The method of using the anti-dirty agent is mostly used in the printing industry. The spraying method is divided into two methods: powder spraying and liquid spraying.
The powders used in the dusting method are generally starch, precipitated calcium carbonate, calcite derived from the reaction of calcium nitrate and ammonium carbonate, fine-grained wax, silica, etc. The requirements for these molecules are generally approximately 15 - Between 30 microns, moisture absorption is small, neutral, no friction, can not affect the process, such as overprinting, covering and so on.
Spraying liquid method is to spray the so-called fast solidifying material. This kind of material consists of a solid that is a phase and the other phase is a liquid. After being printed on paper, it is selectively absorbed by the paper. The solvent part is immediately sticky. The components are related to each other and form an anti-fouling property together with the color.
Disadvantages of the strong antifouling agent are that it is easy to pollute the air and the machine, causing the operator to feel uncomfortable, and it is not suitable for some advanced glossy papers because it will destroy the gloss of these papers.
In recent years, although the ink industry has developed a number of fast-setting inks, the problem of blemishes on printed products has not yet been resolved in a relatively broad range. Therefore, the anti-fouling agent is still in use, and its research is still underway. The principle of anti-fouling agent developed this year is that it consists of immiscible materials. After printing, auxiliaries can float on the surface of the ink layer to form an irreversible “cushion†to reduce the offset of the printed product.
The following are the names and models of several domestic commonly used offset printing ink auxiliaries, which are for reference only.
Commonly used offset thickeners, grease type 101 external oil and 0 external oil, resin type 05-94 thick varnish and 901 thick oil.
Commonly used offset thinners, grease type 165-6 and No. 6 varnish, resin type 8021 resin varnish, 05-01 varnish, No. 6 resin varnish, 906 resin varnish , 40 light varnish and 42 light varnish. Solvent type with 8062 thinner, 57 thinner and 908 white kerosene.
Commonly used scatterers are 8043 scuffing agent, 05-92 detackifier, 653 detackifier, 903 detackifier, and 49 detackifier.
Commonly used anti-drying agents are 522 anti-drying agent, 70 anti-drying agent, 08 anti-drying oil, 70 anti-drying agent and 48 anti-drying agent. Usage is controlled at 0.3-1%.
At present, there are not many varieties of anti-crystallization agents, only 52 anti-colorants, the use of general control within 10%.
Before Christmas, the children will make a wish to Santa Claus, hoping that Santa will bring them a good gift. Everyone knows that Santa Claus doesn't climb out of the chimney, and he is with us every day. It is also one of the pleasures of Christmas to give and receive a beautiful Christmas Gift Box on such a day of Christmas. For you love him and her to prepare a gift, and to wrap the exquisite Gift Box, send it to him on such a Christmas day, I believe they will be very happy.
Christmas Gift Box
Christmas Gift Box,Christmas Gift Present Box,Christmas Box,Christmas Box Gift
ANSHAN JIASHUN ARTS AND CRAFTS CO.,LTD , http://www.jhwls.com