Eyeliner tips to make your eyes more stereoscopic

Whether it is the traditional full eyeliner or the rising eyeliner, only a line of outlines and natural color smudges can immediately add eye to look and make your eyes more stereoscopic. To create this effect, some eyeliner makeup tips must be known.

How to use eyeliner? Five tips for using eyeliner.

1. Eyeliner requires more order of eye makeup than eyeliner. The correct order is after eye shadow, before eyelashes are caught. Because the eye shadow is easy to have excess color covering the eyeliner during the application process, the eyeliner is drawn after the eye shadow, which will make the eyeliner clearer. The eyelashes should be clipped after the eyeliner is finished, because if the eyelashes are used after the eyelashes are applied, it is easy to touch the raised eyelashes.

3, using a liquid eyeliner to draw along the lines just drawn, in order to make the eyeliner rich in layers, you need to use a liquid eyeliner to outline. When drawing, draw an inward from the outer corner of the eye about 1 cm.

2, due to the liquid texture of the eyeliner, the line drawing will of course be more "out of control", and the shortcomings of the eyeliner is also difficult to modify, so if you have a considerable foundation of painting, you can directly use eyeliner to draw the eyeliner. But if you don't have this self-confidence, you can use a pencil-type eyeliner to make a "draft" on the eyeliner. Use an eyeliner to draw a 3cm eyeliner from the outer corner of the eye above the upper eyelid. It feels like filling the gap between the eyelashes.

4, eyeliner can be applied 2 to 3 times, but in the end of the eye is best done once, in order to make the line smooth. When you draw, the tip of the pen must be close to the eyelashes, and the lines will be thicker at the end of the eye.

5, compared to the upper eyeliner, the lower eyeliner is more likely to smudge, so you should also put on the powder to prevent liquid eyeliner from blooming.

The material for Plastic Cap uses the polypropylene resin (PP), where the polypropylene is free of toxin, odor, with sound heat‐resistance and tensile strength complying the national standard; meanwhile the coloring material uses the innoxious, high‐temperature resistant, colorfast and glossy master batch to ensure product quality.

There are multiple sizes and types for the caps for liquid‐infusion glass bottles. We are sincere to produce the easy‐to‐pull aluminum cap for ∅30, ∅32 infusion bottle, aluminum‐plastic composite cap and aluminum‐plastic pull‐tab cap for ∅26, ∅28, ∅30 and ∅32 liquid‐infusion glass bottle, aluminum‐plastic composite cap for ∅36 infusion glass bottle (f or blood product only), aluminum‐plastic easy‐to‐pull cap for ∅32 infusion bottle (3‐piece) and other types; we are capable of producing on the demand of customers.

Tear-Off Cap For Infusion Bottle

Infusion Bottle Tear-Off Cap,Aluminium Tear-Off Cap,Aluminium Cap For Infusion Bottle,Tear-Off Cap For Infusion Bottle

YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , https://www.hongyunyz.com

Posted on