Talking about the Post-cutting Processing of Digital Printing

Cutting is an important aspect of digital printing and finishing. The first is the cutting of paper. Like traditional printing, digital printing also uses a paper cutter to cut the paper or finished product to the desired size and shape. There are various types of paper cutters on the market today, including both manual and automatic computer-controlled models. The cutting specifications for single-sided knife cutters are mostly in the range of 52 to 150 cm. In general, digital cutting is suitable for cutters with a cutting width of 78cm. If possible, computer-controlled cutters can better match digital printing because it can store a certain amount of data. When you cut a job that you have worked on, you just need to call up the original program from your computer, which can save you time for tuning. In the use of the paper cutter, in order to maintain the sharpness of the blade and extend the service life of the paper cutter, the thickness of a cut paper is preferably not more than 40mm, and the pressure of the paper cutter on the paper should also be appropriate. Generally, the paper is softer. The pressure needed is greater, and harder materials require less stress.

It is critical to maintain the sharpness of the blade when using the paper cutter. Care should be taken to properly maintain and use the blade. Once the blade is blunt, the blade should be reground, otherwise the cutting accuracy will be affected. In addition, pay attention to maintain the ambient temperature at 19 ~ 23 °C, relative humidity at 50%. Under such conditions, the characteristics of the paper are relatively stable, which is conducive to the correct use and maintenance of the paper cutter, because the determination of many cutting parameters depends on the paper being processed.

The digital printing of die-cutting can make the final printed product attract special attention or highlight the special features to increase the added value of the product. Whether or not digital printers need to install a die-cutting machine depends on how large the amount of jobs they process is. If not, the die-cutting machine will be idle and wasteful. Choosing a die-cutting machine should pay attention to the processing requirements for printing products. When cutting thicker paper, you can use a platform die-cutting machine. For cutting thin paper, you can use a rotary die-cutting machine.

Equip with a cargo bed or basket that make our golf carts more practical for these peoples with demand of place on the golf carts for stuff transportation,like luggages,,etc, you can also custom the cargo bed to do a harder work,this mainly mean transport much heavier stuffs, our ulitity vehicle realy capable for all these due to its big power motor equiped and we can increase its torque should you need it for heavy work,like farm work by reducing its max speed a little bit, also the size and shape of the cargo bed or basket can be custom made, however,we would better suggest our gas powered utiltiy car should you intend it for heavy work.

Gas&Electric Utility Vehicle

Gas Utility Vehicle,Electric Utility Vehicle,2 Seats Electric Utility Vehicle,Utility Golf Carts

Yongkang Jinghang Sightseeing Vehicle Co., Ltd. , http://www.jhgolfcarts.com

Posted on