The rubber cloth is composed of a surface adhesive layer and a base cloth, and is divided into a radial direction and a horizontal direction. Since the radial extension of the blanket is smaller than that of the transverse direction, the radial direction with a small amount of expansion and contraction must be used as the direction of the blanket's stress when cutting, that is, the radial direction of the blanket is consistent with the circumferential direction of the drum . When cutting the blanket, all four sides should be at right angles and the diagonals are equal, so that the blanket can be uniformly stressed on the drum to ensure product quality. At the same time, the bite of the blanket and the two ends of the trailing tip are punched separately, and the position of the eyelet should be on the same horizontal line, and there must be no height to prevent the blanket from being skewed.
When the new blanket is installed on the machine, it should be tightened first, and then check the blanket for wrinkles and bubbles. If there is no problem after inspection, let the roller turn and compact for a few times before tightening. The new blanket has better elasticity and better stretchability. Tightening the blanket should be carried out gradually. It is required that the trailing edge and the bite should be carried out at the same time. Do not tighten on one side. Every time it is tightened, it is ready to be pressed and rolled for 3 to 5 minutes, so that the purpose of tightening can be achieved by repeating it several times. After the blanket is tightened, we should also visually or gently touch the blanket to check whether the blanket and its cushion material are plain clothes, whether there are irregularities caused by ink skin, paper scraps, etc., and promptly deal with it.
Before the new blanket is put on the machine, the thickness of the liner should be determined according to the specific thickness, uniformity and elasticity of the blanket, and the amount of liner paper should be determined with a micrometer. If the liner is too thick, it will cause greater pressure between the blanket and the printing plate, affect the printing quality, make the print thicker and distorted, and expand the dots, and it is easier to cause premature damage to the blanket. In addition, it will also accelerate the printing plate Graphic wear.
- Full Set Meet Your Requirement: 10 PCS Eyebrow Grooming Suit Kits includes combing Eyebrow Scissors, Eyebrow Trimmer, Eyebrow Tweezers, double end extrusion ring, double headed acne needle, ears picker, eyebrow scissors, small mirror, Eyelash Curler . Full set achieve your requirement.
- All the edge is polished by hand to get the smooth cutting. Seamless closure of tweezers tip which can grab and pull out tiny hair easily and effortlessly.
- A matching eyebrow scissors for a perfect shaped eyebrow grooming is equally important to eyebrow tweezers, allow user to isolate each hair for optimum accuracy and control
- Portable cosmetic mirror are included in our make-up cosmetic tool. The moderate size makes our carry easier, and you can check your makeup at any time.
- Ideal Gift: Eyebrow shaping, Anti-acne, Exfoliating etc. Eyebrow Grooming Set is a surprise gift for women.
Makeup Tool Kit,Makeup Set,Makeup Tools,Face Makeup Brush Set
Yangjiang Yangdong Kartier Beauty Tools Product Factory , https://www.kartierbeauty.com